So now that you’ve got a good idea of the two Wash and Cure machines Anycubic offers, the only thing left is to decide which one is right for you. Unlike the more varied machines from Anycubic and Elegoo, the Creality UW-02 is geared towards large resin prints, favoring not just height like other curing stations but also width. Allow the washing solvent stay still for over 10 hours so the residue could be precipitated and settled. lt is recommended to dispose or replace the solvent after washing 30 models to ensure the washing effect. Elsewhere, both Elegoo options have what you’d expect with a 360° turntable, 405nm/385nm UV curing giving your more resin type compatibility, suspended build plate washing for Elegoo printers, anti-UV lid, resealable washing container with basket, and adjustable cycle timers.

You’ll find that the max wash volume is smaller than the cure volume because washing is typically done in a provided plastic container that sits within the curable area. When cleaning the model, it’s important to have UV lighting shining on all sides of the model. The Wash and Cure Plus has a large metallic pillar which LED lights right to the top of the machine. The last 8 cm of the LED pillar can be angled down at a 45-degree angle to help with curing the top sides of the print. Wash & Cure 3.0 Plus impresses with its simple and minimalist design, which offers two cleaning options: For the washing station machine, cleaning times may vary with machines from different manufacturers, and use it according to the instructions provided by the manufacturer. The following is the reference for cleaning time, which is suitable for Anycubic Wash & Cure Machines: Model Size Here we’ll look at which model you should choose depending on your uses. When to Buy the Wash and Cure 2.0

This is great news for those of you who are concerned for your safety, and also if you have young ones at home or are otherwise concerned that the protective casing may not be properly attached. Wash and Cure 2.0 vs. Wash and Cure Plus: Which Should You Get? The maximum cure and wash volumes determine the maximum model size a machine supports. If you plan on post-processing bigger prints, invest in a machine with a larger capacity. Though not essential, some of the best wash and cure stations come equipped with a mount that can hold the resin printer’s build plate. This means there’s no need to remove the print from the build surface before post-processing, a convenience feature that makes manipulating the print a little easier. If you value premium features such as these, the Prusa CW1S might justify the higher price point. Price The concentration of the alcohol which is used for washing is not high enough, Use alcohol with concentration exceeding 95%.

The container for the washing function offers space for larger models with dimensions of 256 x 209 x 355 mm and is compatible with all LCD resin printers on the market with a size of 8.9 inches and below. The enclosed washing can prevent splashing and evaporation of liquids. There are too much precipitation in the washing solvent. Stop washing, drain the solvent and clean the precipitation. Though automatic washing and curing is the main benefit of these 2-in-1 machines, it’s also important to have some control of the process. Look for machines with adjustable wash and cure cycle and timer settings with plenty of options. Non-Essential Convenience Features Expensive: it’s great if you have the budget, but if you’re trying to save, there are other options that are almost as good. Last but not least, we have the Prusa CW1S– one of the best wash and cure station options out there – which carries the same high-quality build and thoughtful design we’ve come to expect from the company’s printers. It defines itself in more than ways from the competition, not least a steep asking price.

When cleaning the resin models, you can choose to do it by directly inserting the build plate in the washing tank without requiring you to remove the model in advance. A benefit of this cleaning solution is that you are cleaning both the model and the build plate at the same time. The Wash and Cure 2.0 is ideal for those of you on a budget who don’t mind a smaller machine. If your 3D printer isn’t very large or you mostly just print miniatures, then you’ll find the additional cost of the Wash and Cure Plus to be a waste of money. Is it worth the extra spend? The additional features and functionality certainly suggest as much. It features a convenient latched anti-UV cover that, unlike other wash and cure stations, doesn’t need to be removed entirely to access the inside.

In curing mode, the device pauses automatically when the cover is removed. This protects the human body from damage caused by UV light. Washing also comes sided by a unique drying mode that removes liquid from the washed model in preparation for curing, a great function to ward off residue stains. Finally, moving on to the curing mode, the Prusa CW1S uses four UV LED strips beaming at the 405nm UV wavelength. As for compatibility, the Prusa CW1S is chiefly designed for Prusa’s own resin printer, the SL1S, but the company has made it so that it’s compatible with prints coming off of all other resin printers on the market. The basket is useful when you print a lot of small models. This will allow you to remove the models from the build plate, and drop them in the basket close to the bottom of the tank. You will be able to save some IPA because the models will sit close to the propeller, and they will be washed with maybe half a tank of IPA.

Customer Reviews

The dual-layer cleaning basket allows washing with a print platform (from 6.6 to 10.6 inches) and has two heights of 150 mm and 250 mm. This allows you to cure multiple models simultaneously, evenly and efficiently. A customized magnetic fan ensures a high-speed vortex for fast and efficient cleaning. You can also choose to dunk the print into the provided basket and washing container or attach the build plate if you have a Creality resin printer.

Say goodbye to the energy-consuming task of cleaning resin prints by hand, and say goodbye to the time-consuming process of sunlight curing with uneven results. Anycubic offers powerful 2-in-1 washing and curing stations that free you from the hassle of resin 3D printing. Anycubic Wash & Cure Plus is an upgraded version of Anycubic Wash & Cure 2.0, featuring larger machine sizes and functionality enhancements. In this article, we provide you with comprehensive comparison information on Anycubic Wash & Cure Plus and Wash & Cure 2.0 Machine, and hope that it can help you. Overall Comparisons SpecificationsThe washing tank also has a useful cover that hermetically clips in place for easy storage when not in use. It keeps the IPA from evaporating while also keeping the IPA smell inside. Strictly speaking, no, you don’t need a wash and cure machine for resin 3D printing. You can do the same as a station yourself – first dunking the prints in isopropanol to clean them, then curing them with any standard lamp or even out in the sun.