I found that at 18 watts and with the 0.5ohm coil, it was a bit too strong for my tastes, so I ended up opening up the airflow and started vaping RDL (Restricted Direct Lung), and I soon found that this is where the Sceptre Tube excelled.Even with 20mg nic salts, I was really enjoying the vape, full bodied flavour, warm but not too warm, and smooth. Thevapour production was pretty decent for such a low wattage. The instructions in the main were pretty good, but yet again information on protections and fault conditions has not been included. Which is a shame as simple faults and the LED displays should be explained so the user can rectify.

For first fill or when a new coil has been installed leave the pod to stand for 10-15 mins before vaping to make sure the coil has absorbed enough e-liquid. If the booster mode is active it is a rather thirsty device and burns the coils faster - to be expected. It helped bring out the flavour of some cheap juice I had left but that's all it did for me.Use a certified wall charger with a high quality microUSB, such as the cable provided with your Innokin Sceptre. Following the vastly popular original Sceptre Pod Kit, Innokin has released the updated Sceptre 2. With an upgraded 1400mAh battery and a stunning new design. Battery capacity remaining – The battery indicator LED will change colour according to the charge remaining in the battery: Red = 10%, Blue = 10-50% and Green = 50% and above. I did find once the blue LED came on that it wasn’t long before the red LED followed – so use the blue LED as a guide of when to look for a charger! Pros I found in the standard power mode this did perform well but felt like it needed slightly more “ ooomph“.

With the USB port location plus the fact it doesn’t stand up very stably you will find yourself lying the pod down when charging or not in use. For MTL vapers the Innokin Sceptre 1.2ohm MTL coil is provided and the airflow switch on the side of the pod can be set to the MTL position to restrict the airflow the most. Vaping: inhale on the mouthpiece and the device will fire automatically or manually press the fire button.

Gallery

On this version the airflow adjustment has moved to the side of the pod and is accessible with the pod installed on the device. L-R – Fully open, Fully closed, mid position