Makes it possible to mount and control DJI RS 2/DJI RS 3 Pro in a jib, car, slider, cable cam, and other platforms. Product Highlights: Broadcast recording quality microphone for clear, precise audio Supercardioid polar pickup pattern Lower Noise and Higher Sensitivity Two-step High Pass Filter (flat, 80Hz) Three-position level control (-10dB, 0,. Standard 7-inch Bowens mount design for fast easy setup / disassemble Standard 4-leaf velvet design control spread and direction of a beam Cold-rolled steel plates for better strength, tighter tolerance. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).

My only issue is that the power does not give a percentage on the RS2 meaning that if you need to upgrade your firmware. It is potent in offering 13-17 VDC from the D-Tap power source of your external batteries to sufficiently power your DJI RS2, RS3, and RS3Pro camera gimbal. The side bracket attaches from the Base Plate to the body of the DJI Ronin which provides an additional point of contact and added security. Combine that with unparalleled level of Bright Tangerine support, and your LeftField Komodo System becomes the most reliable and hard-working partnership that any filmmaker could wish for. The 2-pin power input port allows you to easily recharge the battery from a P-tap power source with the included P-tap to 2-pin cable.Fat Llama is a peer-to-peer rental platform — we connect people who need stuff with people who have stuff.

Highly compatible with the original Manfrotto quick release plate and RavenEye Image Transmission System. Only comment is that I would like a instruction Manuel in the box that shows power requirements even though it is printed on the base plate.This base for the Ronin is superbly constructed and is equal if not better than the quality of the Ronin itself. This quick release plate extends the length of a normal Manfrotto quick release plate to allow you to better balance your camera from back to front on your gimbal.

The 1/4″-20 and 3/8″-16 threads on the bottom of the Base Plate allow you to mount the DJI Ronin to many different systems such as Tripods, Jibs, Sliders, Car Mounts, Stabilization Systems, and other products in our Ecosystem like the Hydra Alien and Float System. We are a London based importer and distributor, of a wide range of carefully selected professional filmmaking products. The Power Supply Base Plate for DJI Ronin attaches directly to the base of the DJI RS2 or RS3 Pro and allows you to power the gimbal via Gold or V-Mount Batteries via the included P-tap to 2-pin cable.Every part of the LeftField System is machined from single aluminium-alloy billets to create extremely rigid and lightweight components.

Allows DJI RS 2 / RS 3 Pro to work with different equipment in more shooting scenarios, such as a car, handheld ring, and jib shooting. Quickly mount your camera on the RS 3 Mini gimbal stabilizer using the Quick Release Plate from DJI. I’m wondering if there’s some sort of adapter system that I can mount to my tripod plate where I can just remove my camera from my gimbal and quickly attach it to my tripod without having to constantly remove and replace the gimbal plate for the tripod plate. The DJI Ronin Expansion Base Kit makes it possible to mount and control DJI RS 2/DJI RS 3 Pro in a jib, car, slider, cable cam, and other platforms.I have mine mounted on a PROAIM REDWING stabiliszer with Steadicam arm and vest ,the side support guarantees a secure connection of the Ronin to the baseplate, Very well designed by someone who was thinking about what they were doing.