At this point you will need your owner’s manual. Every trail camera has a different way of uploading firmware. Some you will simply need to just insert the SD card and power the camera on. Others you will have to select the software update in the menu and toggle through the options to upgrade. Firmware on your trail camera is basically the software that the manufacturer installs onto the camera during the manufacturing process. The firmware to your specific camera is the coding that is responsible for making your camera function. Wide Detection Angle & Adjustable Field of View: This trail camera is equipped with one 60° central PIR sensor and two 30° PIR side sensors, giving it the ability to detect subjects within 120°. You have the choice to turn on or off side sensors in menu, which lets you customize your field of view depending on the shot. When running trail cameras there is so much to think about from where to place the camera, to keeping it out of sight of potential thieves. How to view save and delete your trail camera photos are the farthest thing from your mind until a problem occurs, then they are seemingly the most vital aspect of running your trail cameras. UPGRADE INTEGRATED DESIGN】 This trail camera adopts the latest half-open integrated body design. The lens and LCD screen are on the same side, which lets you adjust the lens angle easily. The tighter integrated design of the camera body and the high-quality rubber ring ensures strong waterproof and dustproof performance. CEYOMUR hunting camera is the ideal choice for outdoor wildlife monitoring.

The most important part of trail cameras is to have a good practice on how to use, store, and organize your SD cards. The SD card is the life blood of your ability to view photos, and without solid management of your storage, you can find yourself in the midst of a lot of frustration. Good SD Card Practice Doing this allows for you to not only stay organized, but when an SD card begins to act up, and eventually they all will, you will know exactly which card needs to be replaced. Handy to have if you leave your rig and are gone for several hours. This camera is nearly invisible if you mount it in a good spot and use thin paracord to secure the camera to a tree. It's usually the included strap that gives away the camera's location, not the camera. For most trail camera manufacturers all you have to do is locate the model number printed inside the hosing unit of your camera, and match the numbers with the available firmware upgrades. Available firmware is dependent upon the year and model of the camera.

never delete your SD card from your computer, always format the card inside your trail camera to delete photos. In general a manufacturer puts out firmware updates to fix a current problem, prevent a future issue, or to upgrade the quality of performance to the trail camera, all free of charge. Updating firmware to a trail camera is possibly the most important factor in assuring your camera is working properly while in the field. How to Update a Trail Camera’s Firmware Items you will need: Install the fresh batteries into the trail camera. Most trail cameras on today’s market use AA batteries, although there are still a few that require type C batteries. Step 3: Format the SD Card to Your Trail Camera Most trail camera users have transitioned to simply using their laptop or desktop computer to view photos. Just simply plug your card into the SD slot on your computer and use the already installed media player to watch your trail camera video or look through photos.

Upgraded Integrated Design & Powerful Waterproof Performance: Featuring an integrated body design, the trail camera allows you to easily use DC power adapter(Not Included)without plugging in and out the cable. IP66-rated waterproof outer shell, rubber sealing ring and a sturdy case latch strengthen its’ water and cold resistance. If you do use your computer to view your trail camera photos, be sure to safely eject your SD card before removing it. This will assure you the SD card is not working, when you take it out, preventing failure and corruption on your card. On the camera Once your files are on your computer you can do with them what you please. You can delete them, organize your trail camera photos into separate files or you can leave the file intact. Individual Pictures Cannot plug the power in THEN open the unit to set up and test. Must remove the power supply because the door will not open with the power cable plugged in.Viewing, saving and deleting trail camera photos is not a difficult skill to master. Just simply get in the habit of following the basic procedures: FAST TRIGGER SPEED】 CEYOMUR wildlife camera has a lightning-fast trigger speed and a snappy recovery time which is amazingly fast and makes sure that you don’t miss a single bit of the action whether it is fast moving or slow moving. Formatting and deleting are not technically the same function, and if your camera offers both, make sure you choose format. The reason we format an SD card is that it is a complete way of clearing out old files, data, and information, to reduce the risk of data corruption. It is good practice to format your SD card on a consistent basis to maintain your card’s full speed performance, preserve its storage capacity and reduce risk of storage errors.

Not only is this probably the safest way to view your photos, it has the added convenience of being able to save the photos and video you want to keep immediately while you view them. Remove your card safely If you have ever owned a smart phone, it is likely that you periodically receive update notices, where they ask to update your existing phone. The updates are typically focused around the operating systems to allow your phone to operate more efficiently. Trail camera updates work in a similar way. Easy Lens Angle Adjustment & Condensation Removal: Because the LCD screen and lens are both front facing, this wildlife camera lets you adjust the lens angle and position easily. Remove condensation on the lens by just opening the camera case, easy as that. Adopted a normal sized SD card and with the card slot on the right side of the camera body, it's very easy to put and remove the card. Next insert the SD card into the SD slot on the camera, then power it on. Now we are going to format the SD card. Every camera is slightly different in how they recommend to format. For most trail cameras the option is in the menu screen. It may be called format, but some manufacturers call it delete. Toggle through the menu until you find this function, and select yes.Depending on the make and model of your computer, when you plug your SD card into your computer, you may see a popup window that says “import to computer.” This window will give you a few options, including view and import. BUT, you cannot plug the power supply in UNTIL you close the cover, unless you leave the cover open the entire time it's in operation. Not a good idea.

Avoid Filling your SD Card to Capacity- It is difficult to know how many photos your trail camera will take in a given time period, but with that said try not to allow your memory card to fill up completely. Similar to your computer, you do not want to use every bit of hard drive space, because it begins to affect the overall performance of your computer, the same principle occurs with SD cards. The best practice for deleting photos and files from SD cards, is to not delete them at all. Leave them on the card until the next time you go to use the SD card again. At that point, plug your card into your camera and Format the card directly through the camera. All trail cameras have this function through their menu options. (Do not format your card in your computer). CRISP 20MP PICTURES】 CEYOMUR trail camera catches impressive 20MP photos and records great 1080P videos day and night, providing a vivid wildlife world, getting more details and experience. Consequently, I also label the two SD cards that have been formatted to that camera with the same number. This way, I always know which SD card will go to which trail camera. Its like having a match set. For example if the trail camera has been labeled #3 I will have one SD Card labeled 3A and the other 3B. If you do not want to clutter your desktop and your hard drive with thousands of pictures from an entire file, you do have the option of transferring individual photos as well. You merely go through the same process of copy and pasting each individual photo.This essentially resets your card. It deletes all the photos that you have already saved to your computer, it formats files specific to your camera, and it ensures there are no inadvertently transferred files to from your computer. It essentially resets your card to its original state, the exact way it was when you originally formatted it to your camera. Terrific 24MP Images & 1080P HD Videos: This wildlife camera delivers terrific and vivid 24MP photos and clear audible 1080P HD Videos due to premium image sensor & advanced wide-angle lens, showing you fabulous moments of wildlife world with every detail. One of the most secure ways to view your trail camera photos is by using an SD card reader. If you choose this way however, do not go super cheap. I have seen way too many memory card become corrupted by a cheap, poorly constructed card reader. The card reader we have been using most often is the Stealth SD card reader. Deleting photos that are already saved onto your computer is quite different than deleting them from an SD card. Essentially you can do whatever you would like with these photos. You can drag and drop them into your recycling bin, or highlight them and press delete. In Conclusion Switch camera off before removing SD Cards- Trail cameras are heat and motion activated, therefore when you are changing SD cards it is likely that your camera is taking a photo of you. Make sure you always turn your camera off and wait a minute before removing the SD card. If you take the card out before it has finished writing the picture it is currently taking, you run the risk of loosing photos that are already written onto the card