The lower section of the J-Hook moves up or down by adjusting the hex nut on the threaded bolt that connects the two parts.

Cord, wire or chain fit over the hook, or use directly with 2-hole strap hangers or heavy-duty hangers. This will affect the types of hooks you'll need and will determine whether it's strong enough to support your mirror or picture. Personalised advertising may be considered a “sale” or “sharing” of information under California and other state privacy laws, and you may have a right to opt out. Use the Brass Bezel (sold separately), which fixes to the wall and use either Flat Plates or Bridge Plates to fix to the frame. See the instructions below for more details on attaching picture hangers used in combination with J-Hooks.

Measure the distance between the center lines of the two hangers on the frame and transfer this measurement to the wall, making sure that your two marks are reasonably level to each other and spaced apart from the same distance as the distance between the hangers on the frame. Some of the technologies we use are necessary for critical functions like security and site integrity, account authentication, security and privacy preferences, internal site usage and maintenance data, and to make the site work correctly for browsing and transactions. Use a small hammer and the four J-Hook nails provided to attach the J-Hooks to the wall at your wall marks and hang the frame on the hooks. You can fine-adjust the frame to level without taking the frame off the wall by turning the head of a J-Hook connecting bolt with a Phillips screwdriver inserted through the opening on the top side of the hook. Dont get the width wrong at all as in my case the mirror ring fixing loops were the same size as the hooks .

When fitted, the security clip allows the wire or hangers on the picture frame to slide into the hook. Picture Hooks are available either by themselves or in kit form with everything you need to successfully hang your item. The upper section of the hook is designed so that you can make this height adjustment while the hook is under load on the wall by turning the head of the connecting bolt with a screwdriver inserted through the opening on the top side of the J-Hook.Things you do need to consider will be the type of wall you will be attaching the fittings to, also ensuring there is no cable, pipe or stud directly behind the positioning, and whether it is a solid wall or hollow wall. If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy. Step 1: Measure the middle point of the top of the mirror or picture and hold the picture up at the wall at the position where you'd like it to hang.