Examination of the One-Touch Light proved that the method used to activate the switch on it was too cheaply executed to be a reliable light switch. Take one of the range pans and cut a piece out in a circular shape a bit larger than the hole that is in the bottom of the pan using the tin snips. So I drilled the three small reflector mounting holes again, and the three small plate mounting holes again, and very carefully, and very slowly used the circle cutter to cut the larger hole in the middle until . If you have a love of Sci-fi or kitsch objet d'art for your home, then what better than a UFO lamp complete with glow in the dark alien pilots, and poor unsuspecting levitating cow!

I also added some silicone around the edge of the hole to prevent the cord from accidentally getting cut by the metal edge (not shown in picture). If you think the aliens should abduct something else, simply substitute the cow for any other object that fits inside the tractor beam. If you’ve already done that, your item hasn’t arrived, or it’s not as described, you can report that to Etsy by opening a case. When I was finally able to CAREFULLY snap the scribed bits out, I finished up the large hole with a half-round hand-held file. After the main large hole has been cut out and cleaned up, use a file to make the three half-round clearance holes for the reflector mounting screws, and you're done fabricating the plate.You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

It's back, the original Alien Abduction Lamp first landed at Glow Company HQ back in 2009 and hovered around until 2012, and now its back, new and improved! i think it’s the rounded shape of the UFO and the waveyness of your plastic glass, they’re both great touches!

In addition to the beaming-up Bessie, the table lamp's flying saucer also sports glow-in-the-dark little green men heads with bulbous eyes peeking out of each of its windows. Sightings of UFOs aka flying saucers are a wild fantasy dream or intriguing depending on which side you’re on. The ray emitted from the craft is thick glass that rests on a patch of astro-turf to protect any surface area. You can even place your own characters inside the UFO alien abduction lamp, this way you can have a dinosaur being abducted! After everything was done, I found a farm set that had a cow in it at Target’s dollar spot, so I had to get it to make the lamp perfect!