It is a low VOC, water-based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas.

These tiles are exactly what we were looking for - we needed a warm white tile (not cool white) to suit our kitchen and laundry; these are perfect.

CustomTech offers real solutions to the challenges contractors face on the job every day, whether it’s a common issue like young concrete -- or the challenge of pumping leveler up 60 stories in high-rise construction. Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use. After the traveling ended and I married my lovely Jane I stuck with tiling and made a life out of it. It is a low VOC, water-based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas.

Allow it to penetrate for up to 5 minutes, if the surface is drying within 5 minutes, apply more sealer to keep surface wet for up to 5 minutes. This product does NOT contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. It is important that no acidic cleaners or products that contain solvents are used on sealed natural stone. I did applied the penetrating grout sealer with a sponge in accordance to manufacturers specifications. Hazard Codes and their associated descriptions are an essential part of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). Using this product on a regular basis will safely remove soiling and help prevent a stubborn build up without damaging the tile, grout or sealer.

Do you have a suggestion for what to use next and if o Csm apply it on top of this coat that currently shows no sealing? Additionally make sure your User-Agent is not empty and is something unique and descriptive and try again. Sealer Reapplication: Thoroughly clean the surface using the periodic cleaning method, then reapply sealer following application instructions as per label.I'm very put off that it needs 10 coats and am a little confused why they didn't tell me this (they mentioned 'a couple' of coats) and why they would sell me ONE quart when it needs at least three quarts. Conduct a test to see if the surface is completely sealed after 2 hours by applying drops of water on the surface. SVHC is a substance (identified by the European Chemicals Agency) that may have serious and often irreversible effects on human health and the environment.