Only concern i have if his v card has a backplate or at least his mobo has a vme slot above the top PCI-e slot. my 5800x idles around 30c but it is in the attic, warmest room in the house even with the heating off. Due to its asymmetrical layout, the fin-stack of the NH-D15S is off-set towards the upper edge of the motherboard when installed in standard orientation. Considering NH-D15s(160mm) for my H5 Flow case (165mm height limit) over AIO since its less expected to have failures over years.

Also check out eTeknix YouTube, where you'll find our latest video reviews, event coverage and features in 4K! Questa versione , rispetto alle precedenti, oltre al colore nero, dimostra una costruzione e assemblaggio, di fattura qualitativamente migliore, usato per raffreddare una CPU Intel 6950 extreme, per socket 2011-v3, facile il montaggio, adatto per case spaziosi, nonostante le dimensioni, va bene anche in case meno spaziosi, silenzioso, prestazioni come un dissipatore a liquido, per me ottimo acquisto. This chart is pretty self-explanatory but it should give you an idea of the different fan sizes that come with each cooler.The only negative that some people might have with Noctua's products in general is the color scheme which might not be a problem for some of you but for modders it could be a deal breaker. The purpose This TekSpek quickly and easily explains AMD’s new processor socket and related technology to the reader, comparing it to AMD’s previous socket types. As a rule of thumb, if the fan overhangs the RAM, the maximum CPU cooler height specification of the case must be at least the size of the fan plus the height of the RAM minus 7mm (accounting for the height of the socket and CPU). They mention that it outperforms most AIO systems, disperses heat well, and works well with other PC fans.

imo running it with one fan will be just fine as far as performance goes, the only reason I'd consider getting the other fan is for aesthetics. I think the D15S by adding the second fan will be more expensive than the D15 because the PCIE clearance on the D15S. One word of note: I have a B560M Aorus Pro mobo, in a Corsair 4000D case, and there is NOT room to have any exhaust fans above. Sure, I could move the GPU to the second slot but that's not really a solution considering not all motherboards run both PCIe at x16 (unless I'm mistaken which if so, please correct me) because SLI is pretty much dead. Supporting Intel LGA1851, LGA1700 ( since 2021), LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) as well as AMD AM4 and AM5 ( since 2019), the SecuFirm2™ mounting included with the NH-D15S is straightforward to install, provides perfect contact pressure and will stand the test of time even under heavy use.Wondering if reducing the 14900k to 200W is a solid move for longevity with the air cooling(i dont care that it would be on 92% performence). At the same time, the single fan setup and recessed lower fins guarantee 100% RAM compatibility with memory modules of up to 65mm height.

Using the supplied extra fan clips, the NH-D15S can be upgraded with either a second round-frame 140mm fan with 120mm mounting holes (such as the NF-A15 HS-PWM) for maximum performance or a common 120mm fan (such as the NF-F12 PWM) for improving performance while maintaining compatibility with RAM modules of up to 45mm height. On the left side you will find a short paragraph with details of the cooler and some of its features in multiple languages. Well, there are good reasons but when you look at the performance of the Noctua NH-D15S CPU single fan cooler, a good solid heatsink may not need two fans to work well, it just needs one good. Looking at the chart above, we can see that the NH-D15S with one and two fans perform similarly the same and provide excellent idle temperatures.We review the Noctua NH-D15S CPU cooler, the Mack Daddy of Noctua coolers now is available in an S model, the silent version. black version with its black fan and black coated heatsink combines these assets with a sleek stealth look. Thanks to the same asymmetrical dual-tower heatsink design and single NF-A15 PWM fan, it stays true to the NH-D15Ss successful formula of fusing dual-tower performance with excellent RAM, case and PCIe compatibility. Using the supplied extra fan clips, the NH-D15S can be upgraded with either a second round-frame 140mm fan with 120mm mounting holes (such as the NF-A15) for maximum performance or a common 120mm fan (such as the NF-F12) for improving performance while maintaining compatibility with RAM modules of up to 45mm height. Ich kann diesen Kühler jedem empfehlen, der auf der Suche nach einer zuverlässigen und leistungsstarken Kühlung für seinen PC ist.

Having received more than 100 awards and recommendations from hardware journalists around the world, Noctua's NT-H1 is a proven professional grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Topped off with the renowned SecuFirm2 multi-socket mounting system, Noctua’s enthusiast-grade NT-H1 thermal compound and a full 6-year manufacturer’s warranty, the NH-D15S chromax.

Thanks to its recessed lower fins, the NH-D15S provides 65mm clearance for RAM with tall heatspreaders or RGB illumination, making it compatible with most high-end modules on the market. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. The NH-D15S retains the same six 6mm dual heatpipe design as the NH-D15 so overclocking with this beast won't be a problem. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Similarly like the NH-D15, the copper base plate on the NH-D15S has a nickel-plated finish which measures 4.