Handles display of graphics, control of framebuffer, and drawing of polygons and textures [ citation needed] Did we mention there is a super-bright OLED display on MemCard PRO? The display can show you the mounted memory card, along with more information like read and write access indicators. It can also show the card's name, which you can set through the WebUI. It is recommended that a power cord is connected to DexDrive, otherwise some cards won't be detected. Multitap option works depending on the game. Setting any mode on a game that does not use multitap will make inputs not working. Leave mode at disabled unless supported by game and you really to play in multiplayer modes.

Katana memory cards are Second Party, using Sony memory in Katana cases. These are considered acceptable. Alternatively to using cue sheets with .bin/.iso files, you can convert your games to .pbp (Playstation Portable update file). Removed glass support as it's not needed for modern Windows and it seems to be causing problems with Mono. UPDATE: A new version that’s compatible with both the PS1 and PS2 is now available: https://retrorgb.link/ps2memcardprosmoke / https://retrorgb.link/ps2memcardprocharcoal Extended support for Action Replay saves. Non standard saves can be imported now (codelist, e00-exe, etc...).When using Guncon mode, you can override aim in emulator if shots misaligned, this applies a ratio on the x or y axis. We really plan to add more features to MemCard PRO, and everything will be addeed for free, through a firmware update.

In most cases, the 'quadratic' option should be selected. This provides effective compensation for the physical differences between real/emulated hardware, enabling smooth/precise analog input. Menu options are now dynamic and items are enabled/disabled related to the currently selected save.Dynarec can either be ari64 for arm 32-bit devices while lightrec i used for 64-bit capable devices or platforms. The PS3 Memory Card Adaptor is an official Sony USB adapter that allows reading and writing PS1 Memory Cards on a PlayStation 3. Essentially, this memory device can story virtual memory cards using microSD cards. 1GB equates to 8912 PS1 memory cards. OLED display that shows the mounted memory card, read/write access indicators and network information As of version 1.6 MemcardRex has a suport for InterAct DexDrive. Both reading and writing data from/to PS1 Memory Cards is supported. As you may or may not know DexDrive is a very quirky device and sometimes it just refuses to work. Even the first party software (DexPlorer) has problems with it (failed detection of a device). If you encounter problems, unplug power from DexDrive, unplug it from COM port and connect it all again. It is recommended that a power cord is connected to a DexDrive, otherwise some cards won't be detected. Communication was tested on Windows 7 x64 on a real COM port and with a Prolific based USB adapter. To select a COM port DexDrive is connected to go to "Options"->"Preferences".