NatWest, Royal Bank of Scotland (RBS) and Ulster Bank, which are all part of the NatWest Group, will now shut at least 172 of their bank branches in 2023 and 2024. The expanded polystyrene side of the product should be applied to the adhesive/wall. Apply Insulating Lining Paper Graphite+ directly from the roll onto the wet adhesive and slide into place. Smooth out any bubbles with a roller or similar. Leave a small amount of surplus material for trimming where necessary. Now slide the insulating wallpaper into place and brush down with a wallpaper brush, using a down and out motion to get rid of air. Once in place get a straight edge – a piece of wood, steel ruler, spirit level will do – and place along the area to be trimmed. Use a sharp trimming knife to get a clean cut.

It is best suited to those pesky external walls that always seem to lose heat. However, keep in mind that it is not recommended to be used in fire escape routes from inside the home unless the surface is treated with a fire-retardant covering. Erfurt Mav Graphite Plus Insulating Lining Paper Do you have a Power of Attorney? MoneySavingExpert.com founder Martin Lewis explains how this crucial protection works, why it's more important than a will, and how to get one in the latest episode of ITV's The Martin Lewis Money Show Live.

Red Label Insulating Lining Paper

Any small gaps at seams and corners can be filled with flexible filler prior to painting directly with standard emulsion paint or overhanging with decorative wallpaper.

When used in isolation this product is suitable as a localised ‘problem solver’ only for cold external walls and is not recommended for use in fire escape routes or on ceilings If the wall is already painted we advise vigorously sanding the surface to create a key for the adhesive to work effectively. This product is suitable as a localised ‘problem solver’ for cold external walls and is not recommended for use in fire escape routes inside your home unless the surface is further treated with a fire retardant covering. This product is class Efire rated andshould not be used for projects such as new builds and extensions where Building regulations are applicable. The expanded polystyrene side of the product should be applied to the adhesive/wall. Apply Insulating Lining Paper directly from the roll onto the wet adhesive and slide into place. Smooth out any bubbles with a roller or similar. Leave a small amount of surplus material for trimming where necessary.

Thermal Liner

This product should not be used in isolation for projects such as new builds and extensions where Building Regulations are applicable. If used as part of a system that both adds to the insulation value and protects the surface from fire it may be compliant but expert advice should be sought.