As you can see the seal was in very bad condition mouldy and also covered in nasty un dissolved powder and liquid and limescale , this could also cause machines to smell. You will for sure need to have the model number at the very least to locate any Beko spare part with any degree of certainty that the replacement spare part will fit. Today we have had a Beko washing machine model number WMB71442W that needed a new door seal as the old one was badly stained and covered in mould. There is a lot of information here on how we do this and an explanation of the choice you have as well as the impact of each in speed and cost as we are very open and transparent. If the ECOWMB81445LW washing machine is leaking it is a common symptom of a faulty door seal which, if torn or worn down, will allow water through.

Poor ventilation this can lead to stagnant air which can cause mould to form you should leave the washing machine door slightly open when the machine is not in use to let air circulate and dry the insides of the seal out. Talk to engineers that repair applainces and get support from there with diagnosing faults and repair advice. Identifying the correct seal you will need the model number of your appliance, but on some of these Beko seals the part number is stamped on the seal itself making easy identification. Support for problems with Beko appliances in the forums is generally fairly good due to the volume of products in the field and the availability of spare part and technical information. More likely, however, are the drum bearings being worn and these should be repaired quickly as the fault can affect other parts in the machine.Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH). While replacing the door seal should rectify the leak, the issue could alternatively arise due to the pump or the hoses. The rubber gasket in the door seal snugly fits between the washing machine's drum and outer housing. This door seal or gasket is only known to fit the models as shown or as advised and will not fit any others because even if it looks the same, it probably won't be. Beko also produces appliances for other brands so it is not unusual for spare parts like this one to be fitted to other models and even other makes.

Before you do that though, please read our quick guide on how to get the best responses in the forums here, the guys will help you if they can with most Beko problems.This effect can be helped by leaving the washing machine door ajar when not in use so that the door seal dries out and by regular maintenance washes or use of the Affresh washing machine cleaner, which you can find here use of this will also keep bad smells or odours from your washing machine at bay. You may need to replace the seal if your washing machine is leaking from the front of the door, the door seal is torn, warped or damaged or mould has built up at the bottom of the seal and it’s beyond cleaning. Although washing machine and washer dryer door seals are often referred to as being a "rubber door seal" they are in fact and, have been for many years, made from a silicone based compound as rubber would perish prematurely as well as getting dirty. Find a local approved service engineer to repair your appliance with no charges to you for the use of this service.