The controller also has an improved 10km transmission range, so you can feasibly fly the drone up to six miles away, and still get a clear picture on your smartphone’s display. Of course, you should only fly a drone where you can still see it, but it’s a pretty impressive range. While the Mavic Air never went more than 400 feet away from me, I never noticed any interference or interruption of the feed from the camera. DJI Mavic Air 2: Camera features I left the house in June after having used the batteries and having them work just fine. I put both on the charging hub and put them into storage. Unfortunately, I get the impression they are rushing development and issues are surfacing in the consumer's hands. They've put so much resources into development that they possibly cannot afford to make these things right despite are ultimately their responsibility. As a consume I cannot afford to take on their R&D risk nor would I want to. I use this hardware to for business and I need it to be reliable not to troubleshoot or pay for what isn't caught by their engineers. When the aircraft is beyond 20 m away from the Home Point, press the RTH button on the remote controller or tap the RTH button in the app, the aircraft will return to home, match with the image information from takeoff, move horizontally, or yaw to change its nose direction to achieve precision landing. The first flight I took with the Air 2, its battery lasted at least 22 minutes, based on the timestamps of my photos and videos. This flight consisted of a good deal of hovering (which drains the battery faster) as I took pictures of the drone for this review. A subsequent flight, which also involved plenty of hovering, lasted at least 25 minutes. I plan to update this section as I take the drone on more flights.

This guide provides a detailed troubleshooting guide that you can follow to eliminate the most common causes of your problem and most of the time, your drone will turn on. If that is the case, take your battery inside a warm room and keep it there till the temperature recovers and try again.If you recently crashed your drone or dropped your battery accidentally, there is a good chance of physical damage to your battery. Once your battery is out of hibernation, put it in your drone and turn it ON. If hibernation was the issue, it should turn ON now. Battery terminals & compartment is dirty

Hi Nigel, I’m Kerry. I read where you said there are other ways to wake up hibernatingbatteries. I tried your posted procedure but nothing, I have no lights green or any color even after waiting hours. You must have heard the term “ have you tried turning it off & on again” in IT industry. Well, it works and we can try the same with our drone.

You can buy the required components from the given best buy links. We choose the components according to value for money. A hard crash can also break delicate parts of your drone like the arms, motor mounts, or propellers. In that case, you will need parts replacement and DJI is the best source to get them. Electronic bug or software glitch Similar to your battery, your drone’s internal circuitry can also get damaged if you recently crashed your drone or worse crashed it into a water body (lake, river, etc.)

The Mavic Air 2 can record video up to 4K at 60 frames per second, twice that of the Air, which maxed out at 4K/30 fps. It can also record 4X and 8X slow-motion video, as well as 1080p video at 240 fps. The Air 2 can also capture HDR video, but the max resolution for this mode is 4K/30fps. This has been a problem with DJI drones since the P2 Vision Plus. With that if you didn't power it up for a flight every 3 months the FW on the Transmission card would decay and erase.DJI claims the Mavic Air 2’s flight time is 34 minutes under ideal conditions; that’s 14 minutes longer than the Mavic Air, and a few minutes longer than the Mavic Mini. However, it is not a good idea to fly your drone in extremely low temperatures. Even if your drone takes off, it can crash midway due to low discharge from the battery. The battery is damaged LiPo batteries use electrolyte chemicals that freeze in low temperatures and won’t stop conducting current (ions). Due to this, you won’t get any voltage out of the battery. After uploading the code open serial monitor in Arduino IDE at a baud rate of 115200. There you see the output as below screenshot. To eliminate this as a reason for your issue, closely inspect the battery terminals and the drone compartment terminals and make sure everything seems perfectly aligned.