If you want to create your own foam prop or even a Mjolnir, too I’m happy to help and answer questions! I first roughly estimated how much Worbla I would need and cut out two long sheets, since I will be “sandwiching” the craft foam between the Worbla. I first tried it with worbla but then decided to go also for foam as I would have needed to heat the worbla on the handle and was afraid to destroy other parts. It was really hard for me to hand this baby to my boyfriend after hours and hours and hours of detail work – I’m happy to hold, wield or cuddling Mjolnir for me at home – or: when nobody watches 😀 But every time Marcel takes this hammer in his hands I’m such a proud costumer seeing my prince of Asgard with this outfit rocking his Thor cosplay! a. Give it some time, then slide the large inner base piece (2) onto the dowel and glue it down against the inside bottom of the hammer.

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. The details on the side caps got another black layer before I painted everything again with silver – this supports the engraving look.Add Dowel- Attach the handle by inserting the dowel up through the bottom to check how much you want it to go through first. Once the rectangular base of the head is done, mark which side the bottom is and trace and cut a hole for the dowel to slide through. I pulled the loose ends on the inside of the pvc pipe and outside the handle I handsewed the loose ends together and pushed back the seam in the pipe. I set my desk area up by clearing all knick-knacks (I have a small, shared room) and laying a large, flat acrylic board down. To get the dimenstions right I googled the measurements and checked out Pepakura-Files for the basic shape.

You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. Having 8 of this little bastards done I used a soldiering iron to burn a in the side caps – actually I don’t know if it was very wise to burn the immersions, because the iron got too hot fast and it got not really even. Have several straightedges on hand because you do not want to smear the paint by reusing the same edges. I glued it on the top and the whole with pattex – but later it turned out this won’t be enough to fix the handle. If possible, have four rectangles traced out in a single row- if not, you will simply have to glue them together later.The picture below shows the top, where the edge on the side and around the circle are traced and smeared. If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.

Turning off the personalised advertising setting won’t stop you from seeing Etsy ads, but it may make the ads you see less relevant or more repetitive. Add extra fun to your day with NECA's new line of super-oversized, foam versions of classic comic book items, from signature weapons to accessories and other iconic objects!Personalised advertising may be considered a “sale” or “sharing” of information under California and other state privacy laws, and you may have a right to opt out. This approximately 17" heavy duty foam prop replica Thor Hammer is safe enough for conventions, yet crafted with enough detail to display in your favorite space.