MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION. Against neutral house exteriors or stone, the olive green creates a noticeable contrast for definition. Amazing what a bit of garden paint can do! Cuprinol Natural Stone– Image: @visitnumber7 Willow– The pale sage green shade has a very soft, inviting look that complements gardens nicely without overpowering. Willow resembles the colors found in nature. It will give a fence a lush, earthy feel that blends into the surroundings.

Stir thoroughly before pouring contents into a Cuprinol sprayer. Overspraying surrounding areas can be minimized by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Apply only in dry conditions, above 5 degrees Celsius and when bad weather is not forecast. Application by brush: Stir thoroughly before and during use. Brush on product evenly along the grain. Minimum 2 coats required. Application by spray: Stir thoroughly before pouring contents into a Cuprinol sprayer. Refer to the Sprayer user guide for full instructions before every use. Cover any nearby surfaces in case of overspray. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent.

Credit limit exceeded

Untreated wood: should be pre-treated prior to adhesion test with an appropriate wood preserver to prevent rot and decay. We had a fabulous lunch whilst the Cuprinol (and Dulux) Creative Director, Marianne Shillingford, talked us through the latest garden trends and how their Garden Shades are inspired by nature. Cuprinol’s “Natures Brights” Garden Shades Cuprinol’s “Nature’s Neutrals” Garden Shades

Olive Garden– If you don’t want to stray too far away from the wood shades of a fence, Olive Garden could work. The natural olive green tone perfectly captures the colors seen in nature. It has an earthy, organic look. Test a small area first for colour and adhesion: Colour the final colour will depend upon the type of surface, previous treatment and number of coats applied. If using more than one can it is advisable to mix them together in a container or finish in a corner before starting a new can. Adhesion: if adhesion is inadequate on previously coated surfaces, lightly sand before application.

Pallet agreements which are about to expire

Sun exposure – Lighter tints hold up better in direct sun over time than darker shades which can fade faster.