sourcing map PVC Rigid Round Pipe 67.8mm ID 75mm OD 0.35m White High Impact for Water Pipe,Crafts

Product Information

The dimension of the pipe (75 mm x 3,6 mm) is to be understood as follows: The first mm refers to the outside diameter, the second dimension refers to the thickness of the pipe. PVC Connector 75 or 90mm Glue - 2" Male Thread 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. Simply cut the pipe to length, clean the ends with methylene chloride, removing all debris, apply glue to both the pipe and fitting - then push together. Please Note: A tolerance of 5% in cut length measurement must be allowed due to manufacturing process. All fittings and pipework have smooth bores which aid in good flow characteristics and resistance to abrasion.

mm fittings and pipe 20 mm fittings and pipe 25 mm fittings and pipe 32 mm fittings and pipe 36 mm = 1. d : Any water fitting, which when installed, will carry or receive water from the public mains water supply in the UK, must comply with the Water Supply (Water Fittings) Regulations or Scottish Byelaws. VDL 90º Swept Elbow 10 Bar Rated 75 mm PVC swept elbow is used for high flow situation PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe.NOTE: Wall thickness and Internal Diameter may vary from the chart above, but pressure rating and Outside Diameter always remain the same. Most products are made in Europe and are made from high quality materials suited to industrial environments.

Our well trained staff have many years of experience in Horticulture, Agriculture, Parks, golf and domestic irrigation. In the unlikely event that the shipment contains damaged packages or packages are missing, these must be documented on the driver’s consignment note. It is especially well suited to water supply in high rise projects such as apartments, hotels, offices and swimming pools, as well as waste water, coolant and industrial process applications. PVC fittings are suitable to use in many applications including spray lines, drip lines, pump and valve. PVC Reducing Tee 16 Bar Rated 75mm x 75mm x 50mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings.VDL 45º Elbow 16 Bar Rated 75 mm PVC pipe fittings are suitable for use with high pressure flowing liquids VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. Please note that we try to give general advice, this may not be specific to your spa or hot tub so please always check with the equipment manufacturer first. PVC Reducing Tee 16 Bar Rated 75mm x 75mm x 40mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings.

PVC End Cap 75mm Glue 16 Bar Rated VDL is a producer of injection molded fittings for PVC and PE pressure pipe systems. An extended warranty is an easy way to protect your purchase, against any manufacturing defects causing breakdown. We work with landscapers and installers offering a commercial grade irrigation solution for all situations. High quality PVC pipe suitable to use in greenhouse, pump housing, manifold construction, swimming pools, hot tubs and chemical applications. The fittings are glued together making a permanent secure waterproof joint which will withstand continuous pressure up to 10 bar.Suitable for both indoor and outdoor applications and common place on hot tubs, whirlpool baths, spas and swimming pools.

Threaded PVC Socket Glue X Female Thread 10 Bar Rated 75mm x 2 1/2"" Female Thread VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. PVC Elbow 90 Degrees 16 bar 75mm Glue Glue VDL is a producer of injection moulded fittings for PVC and PE pressure pipe systems. These require that a water fitting should not cause waste, misuse, undue consumption or contamination of the water supply and must be ‘of an appropriate quality and standard’. PVC is light to handle and can be easily jointed with a simple set of tools, PVC solvent cement and accessories.Any missing or damaged items must be reported to us by e-mail within 3 days of the items being delivered. Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH). PVC Reducing Tee 16 Bar Rated 75mm x 75mm x 32mm (Outside Pipe Diameter ) VDL PVC injection moulded fittings offer a comprehensive range of high quality high pressure PVC fittings. Pressure pipe that provides excellent chemical resistance to most solutions of acids, alkalis and salts and solvents that can be mixed with water.