Bona Traffic HD Silk Matt 4.5Ltr

Product Information

Floors pre-treated with waxes, polishes or other similar products cannot be overcoated with Bona Traffic HD and should be fully sanded back to bare wood to at least 120 grit, then primed with a suitable wood primer. Depending on where you live, the time it may take for your exchanged product to reach you, may vary. Ensure that floors to be varnished are clean, dry and free from all traces of dust, dirt, grit, oil, wax and any other surface contaminates before application.

All we will need to quote is your full cutting list and the request to wrap the items for collection by your elected courier.Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required. If a large curtain-sided lorry (the size of a double-decker bus) is able to access your premises and pull up outside the property, your pallet can be delivered on the next weekday suitable for you.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.If mixing smaller quantities of lacquer then pour the required amount of lacquer into a separate can. For maintenance and upkeep of the surface, floors can be overcoated at intervals with additional coats of lacquer. Widely used in hotels, restaurants and airports, where maximum durability and a short downtime is essential. Wooden floors should never be saturated with water or cleaned with household detergents or cleaners, as part of a regular cleaning routine, as these could significantly reduce longevity and performance of the varnish. Allow varnish to reach room temperature, insert filter and shake the container thoroughly before use.

Lacquered floors should be dry swept or vacuumed on a regular basis to remove surface particles of grit, dirt and small stones that could scratch or mark the surface. Whether you want to elevate the edges of flooring, panelling, or furniture, our Double Pencil Round on Thickness profile offers a timeless and refined look. We also provide technical advice, repair services and training for floor sanding professionals in the UK. A durable and protective maintenance coat that is ready-to-use, offering extended protection against wear. High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time.

This edge profile is commonly found in tabletops, countertops, and mouldings, adding a touch of sophistication and visual appeal to the finished product. Floor will take light foot traffic approximately 8 hours after the final application and may be put into full use after 12 hours.

We use a third-party courier service who have a strict policy on abuse or harassment towards their drivers.Where there is a risk of side bonding, Bona Prime Classic is recommended for the initial coat on bare wood. Another important note: if Traffic HD has been combined with Bona Prime Deep and Bona Create, then the surface must be allowed to cure for 1 week before covering the surface. I tried to use this over some old stairs that had been varnished with a water-based polyurethane a long time ago. You will then need to scratch the surface gently with a coin - if the finish stays firmly attached to the surface the adhesion is satisfactory.