Trend Anglefix Miter Guide for Quick & Accurate Mitersaw Angle Setup, Red, ANGLEFIX, 16.5 x 31cm

Product Information

I have read elsewhere that some owners do not use this, but in my honest opinion it is a no brainer, because without it on the smooth and shiny surface the work piece has got every chance of slipping a few millimeters (without you even noticing until it is to late) or being pulled into the blade. The flip stop arm is 100mm in length and there is no play even when heavy load is exerted, ensuring for precise, repetitive cuts every time. The V shaped steel cursor seats perfectly in the mitre gauge V grooves and locks off with a brass knurled knob eliminating any play.

The final part of setting up is to square the gauge to the blade/mitre slot by loosening the eccentric screw at the rear of the red outer brace using the allen key provided, and then with a spanner turn the ¾“ nut below it in either a clock or anticlockwise position. These can be adjusted with the Allen key supplied and even with the smallest of turns the gauge can go from a sloppy fit to one with no lateral movement at all. These expansion disks can take an average machine with over sized mitre slots and turn it into an highly accurate table saw.

Rear T-slot for mounting and front T-slot for adding wooden sub fences, and it's also equipped with INCRA's patented incremental racks for perfect repeatability when. oh and I need to add, that the saw table work surfaces are fairly small, at 37 x 37cm and 35 x 42cm respectively. deep x 450mm long and features a series of 4 expansion discs to ensure zero side play and friction-free travel. Making use of INCRA’s rack pack technology for pin point millimetre accuracy and suitable for use with all models of INCRA Mitre Gauge. Linoleum is a flooring material made from linseed oil, pine resin, ground cork dust, sawdust, and mineral fillers like calcium carbonate.

As both of these could have caused the expansion disks to wear prematurely (I had the Incra 2000 at the time), I wrapped some wet n dry around the poor excuse for a mitre gauge which I got with the saw and ran it up and down the slots until the tight spot and burrs were removed. INCRA Mitre Sliders are the greatest shortcut ever invented for getting a sled or other fixture tracking perfectly through a miter slot.Unlike a lot of mitre gauges the Osborne can not only be used on both sides of the blade, but reversing it to sit in the other mitre slot can also be achieved without the need of tools. INCRA Miter Gauge V27 is engineered to provide a high performance, yet low cost upgrade for any tool in need of a better miter gauge such as a Table Saw, Band Saw, Router Table, Disk Sander or Belt Sander. After fitting the fence I gave it, the Glidelock bar and the mitre slot itself a thin coat of wax to make sure everything ran smoothly. JessEm Mite-R-Slide II is a unique new mitre gauge accessory for the router table, designed to be mounted on a Mast-R-Fence II, TA Fence or Rout-R-Fence, and slide smoothly across the table on four wheels, moulded to fit snuggly into the track of the. On top of the fence is a steel scale with permanently etched 1mm graduations running from 0 to 440mm.

Axminster Tool Centre Ltd trading as Axminster Tools is a credit broker and is Authorised and Regulated by the Financial Conduct Authority. So in summary this is an extremely precise, beautifully engineered mitre gauge complete with fence and flip stop that would be either an excellent upgrade to any existing table saw or as a precision mitre gauge for use on a purpose made router table. Now come on, these companies know that 99% of aftermarket accessories are made to fit the standard 3/4”x3/8” slot, so why the hell would they cut a different size slot in their machine and then only produce rubbish accessories to fit it?

This suburb device can be moved back out of the way when not in use or locked in position when needed.