All Weather Roofing Compound Bitumen Waterproof Roof Coating 25 Litre

Product Information

For large areas use the 120cm ( 47inch) wide roof fleece and cut it to the appropriate length depending on the situation. For this reason, the cold flat roof principle is not as interesting as compared to other possibilities. The StressPly Flex built up membrane is a high strength torch-on bituminous waterproofing system, and a popular choice for refurbishment projects. If the existing deck consists of close boarded tongued and grooved timber with a minimum thickness of 18mm, it is advisable to use exterior grade WBP 6mm plywood as an overlay.

Garland UK was appointed to inspect the signs of water ingress, carrying out a site visit by the local Garland Technical Manager, Dan Crowley, to investigate the root cause and custom solution to the issue.The deck must be free from any dust, dirt, moisture etc and may need to be primed with special felt primer. Single-ply membranes can be laid as one entire piece with the eaves and verge already formed in the factory or in rolls which are laid in strips.

With a lifespan of up to 50 years, our Resitrix and Hertalan EPDM range of membranes offer sealing versatility for every challenge and, provided the decking is sound and the structure can carry the extra weight, they prove to be the perfect flat roofing ‘overlay’. If the project is located in a very hot area with very intense sunshine avoid applying the system when the sun is the most intense and work early in the morning or in the late afternoon. Check the weather forecast before starting the roofing job and aim for dry conditions and warm temperatures.RD-Elastodeck is an elastomeric coating designed to waterproof aging and/or leaking bituminous roofing. Bitumen can be modified with a number of different materials to provide different membrane characteristics; limestone, sand, and most importantly, polymers. If you have any questions or require any assistance, opening hours are Mon - Sat 8am - 5pm, contact us.

Climates around the world are becoming more extreme with increased rainfall and above average temperatures. cap sheet comes in three mineral colour finishes and there is a selection of underlayers and AVCLs to suit specific project requirements. Cold applied membranes are a safer alternative to using hot bitumen and gas torches, but are only really suitable for small jobs such as small repairs or shed roofs.Load bearing supportive structure - transmits the weight of the roof and any loads acting on it onto the loadbearing walls. Not only do they provide protection from noisy aircraft/traffic, but also heavy rainfall or hail, which can cause problems on a flat roof. Built up bituminous membranes are probably the most economical and common form of roof covering material for domestic flat roofs.