Lithofin KF Cement Residue Remover, 1 Litre

Product Information

Lithofin KF Cement Residue Remover dissolves organic deposits such as cement and mortar residues, residues of flexible grouting materials, efflorescence, rust and calcium deposits. The dirt can then be completely removed from the surface. This time-tested combination has proven to be the ideal product for many cleaning requirements of the professional user. Ordinary cleaning won’t effectively remove grout haze. Help is at hand though thanks to low-cost specialist products such as Fila Instant Grout Remover that can make light work of removing any grout haze on the surface of your new tiles in your bathroom and kitchen. Lithofin cement away effortlessly removes surface residues such as mortar and cement, efflorescence, encrusted and engrained dirt, rust as well as calcium and limescale deposits.

This ensures that your grout is spread evenly across your tile. And while the grout float will remove the majority of the grout from the surface of the tile, invariably a thin layer of grout remains on the surface of the tile – otherwise known as grout haze. The best way to remove grout haze: step by step guide Step 1 As with all paving cleaning and surface treatments, we strongly recommend that you always test NCC Cement, Grout & Salts Residue Remover on an inconspicuous area prior to its general use. Always mask and protect any adjacent areas and materials that are not being treated with the product. Allow the NCC Cement, Grout & Salts Residue Remover solution to work and react for around one hour at 20°C, do not allow to dry out. After one hour, or if it starts to dry out, re-apply and this time leave and allow to work for around half a day to a day, approximately 12 to 24 hours, then pressure hose / jet wash off with clean water.Iron containing natural stones such as serizzo can develop yellow discolouration (rust) and should therefore be treated with Lithofin MN Builder’s Clean to avoid this effect.

Apply the solution directly to the concrete spill or stain. Leave in place until the stain has been converted to a puttyAllow the grout time to initially set and become firm in the grout joints. Always follow the grout manufacturer’s instructions but generally it’s around 15 to 30 minutes. Step 2 Please Note: always test the product in an inconspicuous area prior to use. Acid sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes. NCC Cement, Grout & Salts Residue Remover is the best modern formulation that we have had specifically designed for effective and efficient cement, cement grout and efflorescent salts removal. This advanced cleaning solution can be used to help remove cement, cement grout and efflorescent salt residues on all types of unpolished natural stone and porcelain tiled paving. This unique NCC formulation will also not cause enhanced, or aggravated staining from any naturally occurring iron deposits, such as can commonly be found in light coloured sandstone and granite, especially with imported natural stone paving slabs. Removes stubborn cement and mortar residues from all types of porous and non-porous tiles How to use Biostrip Concrete Remover Allow the solution to work and react for around 10-15 minutes at 20°C, do not allow to dry out by re-applying the solution as required whilst scrubbing the surface, then pressure hose / jet wash off with clean water.