Joined in 2023 
82 
63 About this deal
The CYHI514 from mrocioa is a simple and affordable HDMI splitter that features a few aces up its sleeve, making it an attractive option for owners of several digital monitors or TVs. Sarah has an Associate of Arts from Collin College and a Bachelor of Arts in English with a Creative Writing concentration from Nicholls State University. HDMI splitter: A splitter takes the signal from one source device and simultaneously sends the HDMI signal to multiple devices. For instance, you might use a splitter when you want to watch a movie on two televisions, like one in the living room and another in the kitchen. The switch/splitter is the HDMI 1.4 version and can transmit video in 4K Ultra HD quality; the selection of supported audio formats is also fairly good, it includes Dolby TrueHD, DTS-HD Master Audio, and LPCM, among others. OREI is one of the most reliable brands for HDMI splitters, and this 8K 1x2 splitter will future-proof your setup for quite a few years. It’s a pricey investment, but it’ll allow you to send a 4K@120Hz signal from one input device to two different devices via HDMI 2.1 ports, as long as all of your devices support that resolution and refresh rate.
Though she is still writing for Android Authority, she went on to start writing for MakeUseOf, KOINO IT Solutions, and, of course, Review Geek.The forward compatibility is another story, though, so there is still a couple of pitfalls you’d want to avoid here. Some devices may not be compatible due to the HDMI version differences. Helpfully, that info can also be found in the manuals. So don't forget to compare the supported formats. Most HDMI switches support basic audio signals like LPCM, Dolby Digital and Dolby Digital Plus, Dolby True HD, DVD and Blu-ray Audio, DTS-HD, Dolby Atmos, among others. As for the maximum resolution, it is only limited by the bandwidth that a given model supports. This can range from FullHD all the way up to 2K, 4K, and 8K formats. As of HDMI 2.1-powered splitters, the maximum bitrate is capped at 48 Gbit/s, which allows utilising a single splitter to successfully stream the digital signal on multiple devices with little to no loss of output quality. The older, 2.0 version of the HDMI (UHD) can handle up to 18.0 Gbit/s, which should be more than enough to handle 2 to 3 4K (60Hz) monitors or TVs at the same time. Controls
While many splitters and switches don’t require an external power source, others do. Be sure you’ll have an available outlet if that’s the case. How We SelectedThere are a number of factors that you want to think about, the first being splitter or switch. If you’re going from one source to multiple displays, you want a splitter. If you are connecting multiple content sources to one display, you need a switch. Once you have that nailed down, you’ll want to consider the following. Inputs and outputs
As for naming, a 1-in/4-out splitter is often called a 1×4, with one input and four outputs. Similarly, a 3-in/1-out switch is referred to as a 3×1, comprising three inputs and one output. HDMI Splitter vs. Switch A typical HDMI splitter has one input and multiple outputs, such as 1×2, 1×3, etc. Connect the HDMI cable from your source device (like a gaming console, Blu-ray player, or streaming device) to the splitter’s input. Then, connect the HDMI cables from the output ports of the splitter to your display devices (like TVs, monitors, or projectors). Keep in mind splitters and switches are different. While an HDMI splitter distributes a single source to multiple devices, an HDMI switch allows you to connect various sources to a single display device and switch between them.When selecting an HDMI splitter, it’s essential to consider specific factors to ensure it meets your needs. Here are some key aspects to take into account: Enable video output on your source device: Ensure you configure your source device to send video through the HDMI connection. Most have only one option, and they will use this automatically. That being said, the model doesn't support the 2-way transmission from two TVs simultaneously, that's not what it is made for. What it is made for is easy switching between the devices (either TV sets or sources) without you having to untangle the wires and reconnect. You will only have to push the button on the splitter, and it will switch to another of the two connected devices. The currently operational port is indicated by a tiny LED light that will turn itself off in case any issues with the connection occur. Connect your source device: Run an HDMI cable between the HDMI output of your source device (e.g., laptop) and the HDMI input of the splitter. If your device doesn’t have an HDMI output, you may need to use an adapter to convert the connection to HDMI. In April 2020, she started writing for Android Authority, covering listicles, helpful how-to's for Android devices, and content on the Nintendo Switch, PlayStation 5, and Xbox Series X/S.
Great Deal 
New Comment