Audio-Technica AT-LPW50PB Manual Belt Drive Turntable - Piano Black

Product Information

A year ago we announced the arrival of new budget players from Audio Tecnica. Two of these were AT-LPW40WN and AT-LPW30TK. Common to these is that they have strong similarities to the model being launched today - the AT-LPW50PB. Belt-driven budget players Likewise, a built-in phono-line preamp lets you connect up to a home stereo or powered speakers (that wouldn’t have a phono stage of their own) as soon as you plug the turntable in, letting you get to your tunes straight away. At first, I heard a faint noise between the belt and the pulley or between the belt and the plate. After an hour of running in, nothing could be heard, not even after longer stopping times.The drive system simply requires a short break-in period, which is not unusual. Audio Technica AT-LPW50PB Review – Phono Preamp and Tonearm Newport Test Labs measured the voltage at the line output of the AT-LPW50PB as 157mV for a 1kHz test signal at a recorded velocity of 3.54cm per second, which is about that specified by Audio-Technica but appears lower simply because Audio-Technica uses a higher recorded velocity than Newport Test Labs (Audio-Technica’s specification is 200mV at 1 kHz at 5cm per second) when testing. It’s a good result. There is more information to be had too. Switching the phono stage off and moving to the iFi Zen Phono (to say nothing of the Cyrus), drops the noise floor further and reveals more information and better tonal realism at the same time. Judged by the competition, the internal phono stage that Audio Technica has fitted to the LP5X is perfectly satisfactory but - like the competition - there’s more to be had out of it.

The red trace on Graph 4 shows channel separation vs. frequency and you can see that channel separation reaches a best result of 27dB at 1kHz (7dB better than specification), and maintains this level of performance out to around 6kHz before diminishing to around 20dB at 10kHz and down to 10dB at 20kHz. The platter is a lightweight cast aluminum construction with a fixed radius for the flat belt and rib-like bracing towards the center to prevent platter resonance. The flat belt is already stretched and can be grabbed with a red ribbon from the top through the side hole. You put the platter on the platter bearing and pull the belt carefully over the pulley – done.

Introduction - What is the Audio Technica AT LP5X?

This is a manual belt-drive design with a speed-change control at the bottom left of the top of the plinth. Regardless of whether it’s playing at 33.3 or 45rpm, the Audio-Technica’s sensor-monitored drive motor is designed to deliver precise rotational stability and consistency. The belt turns a pro-standard anti-resonance aluminium platter.

The belt for the Audio-Technica AT-LPW50BT-RW turntable attaches to the drive motor’s pulley underneath the cast-aluminum platter. The AT-LPW50PB is the top model among the belt-driven budget players, but has to find itself well behind the more elaborate mid-range player AT-LP7 in the hierarchy. This one also has belt drive, but at double price. Currently at the top of that list is the AT-LPW50PB, available in Australia after some anticipation, given that it launched in the USA at virtual CES 2020. Playing Mary J. Blige’s No More Drama also saw this turntable turning in a cohesive and musical performance, with a surefooted and robust presentation that remained unflustered even as the song became more demanding, delivering plenty of fine detail and rendering the music with a lovely composure, though this was perhaps partly because it was just a little toned-down in the extreme highs. The tonearm is a straight-line carbon-fibre statically-bal­anced type with spring- applied anti-skating.We put on the current Woodkid album S16: The Audio-Technica AT-LPW50PB presents the lush string arrangements in a wide and powerful way in an impressively large space. That should correspond to the intention of the producer, who not without reason put the orchestra in London’s Abbey Road Studios recorded. Their huge Studio 1 is famous for its rich, wide sound. And Audio-Technica reproduces this very well. The AT-LPW50BT-RW turntable made the album sound even better when it had a wired connection to a component system. I tested it with both the built-in phono preamp and through my own NAD phono stage. The dedicated NAD unit sounded better with slightly more detail, but not by as much of a margin as I expected. Should you buy the Audio-Technica AT-LPW50BT-RW turntable?

Audio Technica AT-LPW50PB has built-in RIAA, but may always be bypassed if using external RIAA or RIAA integrated in amplifier.

Why is Audio-Technica AT-LP5X better than Audio-Technica AT-LPW50PB?

On this album van Veen stretches the concept of slowness to the extreme. One critic wrote of it that: “he creates an hallucinatory effect, a kind of minimal music avant la lettre.”