About this deal
The Polyfilla must be kept from direct sunlight in a cool and dry place with temperatures under 70°F (21°C). To further help maintain the product’s lifespan, make sure that the lid is properly sealed after each use The answer is technically yes. You can paint directly on Polyfilla if you know the potential effects and take the necessary precautions.
Use a setting accelerator: Some Polyfilla products have a setting accelerator that you can mix with the filler to make it dry faster. Loss of gloss is normally only noticed with high gloss paint & varnishes. It is caused by the settling of dew or condensation on the paint shortly after application. This is often a problem when painting out of season, or in areas of high condensation like bathrooms. Putting it right Overall, the drying time for Polyfilla depends on various factors such as temperature and humidity. It generally takes 30 minutes to an hour for Polyfilla to dry in normal conditions.
When the surface is thoroughly dry the affected surface will need to be rubbed down using 'wet and dry' abrasive paper. It can then be re-coated. Carrying out the task to complete a smooth running surface for your wall will require the following: Ensure you scrape the paint up until you reach the surface. Hold the scraper securely in your comfortable hand and carry out the same arm movement throughout. The motion is to stroke upwards and to repeat the same motion for best results. If any wood comes up with the paint, stop. Yes indeed Smoothover can also be used on ceilings, in all cases please ensure that the correct Smoothover Tool Kit is used....
Allow the surface to dry and then rub down using 'wet and dry' abrasive paper and a solution of warm water and detergent. Once rinsed and dried the area can be repainted. This is a common occurrence in new houses and is often the result of plaster drying out or movement of the building. Putting it right
The leading brush cleaners such as Polycell Brush Cleaner do a better job of cleaning and conditioning than white spirit, removing any chance of a colour transfer when you next... Old plaster often becomes very weak and when you strip off wallpaper it sometimes takes the plaster with it. You have two options. Firstly, you can strip the wallpaper using... When the surface is thoroughly dry the affected surface will need to be rubbed down using 'wet and dry' abrasive paper. It can then be re-coated. This should only be done once the conditions improve or when the condensation problem is resolved.