Textrol may only be applied to bare wood surfaces or a weathered wood that was previously finished with Textrol. All other oils or sealers must be completely and thoroughly removed with a wood oil remover such as Owatrol’s Aquanett and then the surface must be cleaned and neutralised with Net-Trol before applying Textrol. If necessary sand the surface after cleaning and stripping (80 grit paper). After cleaning, allow the wood to dry for 2-3 days before finishing. Previously coated surfaces To apply Textrol to weathered wood first ensure the wood is fully dry (preferably allow 2-3 completely dry days after cleaning) although we know this can be difficult to guarantee with the British weather! You can use a brush, roller or garden sprayer to apply the Textrol and you should apply an initial coat and allow 15-30 minutes for it to be absorbed into the wood. The important thing to remember about Textrol is that it should be applied wet-on-wet which means that you should not allow the surface of the wood to dry between coats. This is because Textrol’s place is in the wood and not on top – if you allow it to dry then the Textrol which has been absorbed will prevent the new coat form penetrating the wood! Penetrating wood oils are an excellent way to achieve long-term outstanding protection for your exterior wood surfaces. They penetrate deep into the pores of the wood, saturating it and preventing any moisture from entering. Also, as they protect from within, they do not form a film on the surface of the wood and so will not peel or flake. With solutions from Owatrol, there are 2 options if you are looking for a saturating wood oil – Textrol and Deks Olje D1. Protect your fence with Textrol Before starting, test the color choice on a small area. Allow to dry to determine final color (remember that this color will lighten over a couple of months to the final color). Ensure you have cleaned the wood as detailed above and left it to dry for at least a couple of days

Shop item collections (treatments, fixings) these do not need to be pre-booked you can just turn up and pay in normal working hours. All surfaces must first be clean, dry and free of dirt, grease, grime and mildew. If any mildew is present, treat it with a solution of 1 part bleach to 3 parts water. Scrub the solution on to the surface and allow to stand for 10-15 minutes then rinse thoroughly. Clean weathered wood with Net-Trol to remove the loose wood fibres, dirt and other surface contaminants. If necessary sand the surface after cleaning (80 grit paper). After cleaning, allow the wood to dry for 2-3 days before finishing. Previously oiled surfaces Textrol Laboratories Inc.(formerly Textrol Inc.), is a world leader in Precision Yarn Tension Control Systems. Textrol Laboratories offers the most advanced Hysteresis Brakes and Permanent Magnet Brakes for tension control systems in the world. Our precision calibration methods give us the ability to build a world class Tension System for most of the Yarns, Strands, Ribbons, Etc. used in the industrial world. Available in Clear, Redwood and Cedar Tones, Owatrol Textrol Penetrating Oil Finish is a high solids, premium oil finish for exterior wood.penetrating wood oils which protect from within and are either clear or tinted and enhance the natural look of the wood Clean all tools and equipment with white sprits whilst still wet. If allowed to dry, remove with paint stripper. Textrol enhances the natural beauty of the wood whilst providing a mildew-resistant finish with exceptional and long-lasting protection from the effects of moisture, weathering and UV rays. It can be applied wet-on-wet which saves time as you don’t need to wait for coats to dry during application and the maintenance is easy with local touch-ups and no laborious sanding required! NOTE: Any rags, steel wool etc. soaked in Textrol may spontaneously catch fire if improperly discarded. These must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste. Things to Remember Once the timber is saturated, brush out or wipe any excess product that has not penetrated within 15-30 minutes of applying the last application to avoid shiny spots.

When the time is up, scrub and clean the top of the wood while you let water drain over and rinse the wood off. Note: Do not create a film. Textrol HES is not a surface coating, its place is in the wood not on the surface. MaintenanceAccess must be suitable for lorries which will be 3.5 tonne 7.5 tonne or 14 tonne lorries (7.5 tonne being similar to average refuse collection lorry) Coley is off to a great start in trying to nail down one.feel like it was a good performance, but I still have a lot to learn and a lot to go, Coley said. made a couple of (mental errors) in the game, so I just working in practice, trying to get better and just trying to get focused.

Sand seen face with 60 - 80 grit paper in the direction of the grain ideally with a belt sander to remove 'millglaze' (millglaze is the compacted fibres on the surface caused by the machining process, millglaze needs to removed otherwise the oil wont penetrate correctly)

Textrol HES is a single coat saturating oil, developed to penetrate deep into softwoods and European hardwoods. Textrol HES has enhanced UV protection and a high solids content that protects the wood against the vagaries of the weather and UV rays. Having a luxurious matt-sheen finish Textrol HES enhances the grain and natural beauty of the wood. Properties Gary (Managing director at Owatrol UK) proclaims “Textrol is not a top coat, it is meant to be in the wood not on top. Textrol protects wood by making its way through the wood and creating a matt like finish.”

Textrol HES is perfect if you’re short on time as it has the same great protection properties of Textrol but only needs a single coat! The required maintenance is minimal with likely maintenance coats only required once in every couple of years or longer making it a sound investment for the future. Ideal Uses for Owatrol’s Textrol HES NOTE: Any rags, steel wool etc. soaked in Textrol may spontaneously catch fire if improperly discarded. These must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste. Restrictions Textrol enhances the natural beauty of the wood whilst providing a mildew-resistant finish with exceptional and long-lasting protection from the effects of moisture, weathering and UV rays. It can be applied wet-on-wet which saves time as you don't need to wait for coats to dry during application and the maintenance is easy with local touch-ups and no laborious sanding required! When first applied, Textrol will give the wood a rich, matt colour which will gradually lighten over time to the finished look. It is now available in 8 different colours for a range of looks all with premium protection. Apply a second coat of Textrol in the same way as the first. Again allow to soak in for 15-30 minutes. If none of those took your fancy, there are an endless number of different types of decorative fence panels, from curvy tops to castle styles you’re bound to find something right for you – do be aware though that these can be costly!

This Product is DeckMark & CladMark Certified.

Owatrol Textrol Penetrating Oil Finish is a deep penetrating solvent based oil which provides a long lasting UV and mildew resistant finish to wooden surfaces.