Provides some protection against moisture and water, ideal for chopping boards, but it is still recommend to avoid high humidity

Thoroughly clean the surface with Intensive Wood Cleaner, mixed 1:20. Then wash with clean water. After cleaning, leave the surface to dry for at least 8-9 hours Wait approx. 30 minutes at 20°C, while the oil soaks into the wood. Apply more oil if dry areas appear.

Woca Woodcare Shipping and Delivery

Apply the lye, undiluted, with the WOCA Applicator, going with the grain. Coverage is approximately 250 square feet per 2.5 liter container. Herefter tørres al overskydende olie af med en fnugfri bomuldsklud. Overfladen skal være helt fri for overskydende olie. Replace the buffing pad with a clean one and put a terry cloth towel or polishing cloth underneath the pad and buffer and polish off all excess oil. No excess oil should be left on the wood surface It is fair to say that application to all areas of the wood, whatever the project, is always better. However the worktop will be fine if you are unable to apply to the underside.

Contrary to its name, teak oil in fact does not actually contain any oils or reminiscent of the teak tree. Many products are referred to as “teak oil” because they are marketed for use on teak and other similar timbers. Teak oils’ composition may vary but it is most often based upon a mixture of linseed oil, varnish, and mineral spirits. Many types of teak oil provide a good protective barrier for wooden worktops, but will often create a glossy sheet that – in our opinion – does not accentuate the beauty of hardwood timber worktop and looks artificial. If your wooden worktop is marked or lightly scratched a fresh coat of oil will make these micro scratches disappear.Is your oak worktop solid oak or veneered? Is it bare wood or does it have an existing finish? From what you are saying it sounds like it is bare wood or that the original finish has worn off. Oiled surfaces should never be cleaned with household detergents or cleaners such as washing-up liquids as these are designed to break down and dissolve grease and oils. Always use a dedicated wood surface cleaner.

Applying a top oil to a kitchen worktop will enhance the natural colour, grain and character of the timber. If you’re installing a new or renovating an old worktop by sanding, wipe over a small section with a slightly damp (not wet) cloth or sponge to get a good indication of how the worktop will look when oiled. See our full range of En passende mængde olie fordeles med pensel i et jævnt og dækkende lag. Om muligt bør bagsiden af træet have mindst én gang olie.More often than not worktops are fitted before application, workmen are often in a hurry to get things done before you are able to get that treatment applied. Or it could be that you have inherited a worktop when moving to a new house. What ever the reason it is not the end of the world if you are not able to cover all areas. I myself have a solid wood worktop and have only treated the top and sides and so far have had no warping after 3 years. WOCA worktop oils are designed to have a natural matt finish to replicate the appearance of natural wood. When applying these products, all that is required is 2 thin coats. Apply the first coat working the oil into the surface of the wood with a clean, white (uncoloured) lint free cloth or microfibre cloth. Remove any excess oil from the surface of the wood. Once fully dry, apply the second coat again removing any excess oil from the surface of the wood. As an important part of our promise to work towards a more sustainable world, our products are combined by natural oils and soaps that preserve and strengthens the woods natural properties. We highly appreciate each client relation and always try to understand the needs of our business partners, so that together we can ensure the best customer solutions within counseling, education, service, and products.