Lieber Silk White 6 Gang Dimmer Switch 2 Way Trailing Edge LED 400W - Curved Edge

Product Information

There are no 4-way dimmer switches, but this kit from Leviton is functionally what you’re looking for if your goal is to operate and dim your lights from three or more locations. The reason 4-way dimmers aren’t possible with traditional switches is due to the way that light switch circuits work, and this kit gets around that problem by not using a traditional light switch circuit. Instead, it uses a primary switch, a companion switch, and a plug-in bridge unit that allows them to connect wirelessly. Wattage refers to the amount of power drawn by the light bulbs, so it has a direct impact on the type and number of bulbs that you can control with a dimmer switch. “To determine the appropriate wattage capacity for a dimmer switch, calculate the total wattage of the bulbs it will control,” says Jason Brady, owner of Above and Beyond Service Company. “For example, if you have five 60-watt bulbs, the total wattage is 300 watts.” You can then select a dimmer switch that’s capable of handling over 300 watts, because it’s important to leave a safety margin. As an example, four 5w LED lamps in a compact room will only total 20w, while a 250w dimmer switch requires a minimum load of 25w. In this case, the dimmer switch simply won’t operate. Therefore, a low-load dimmer switch rated at 5 – 50w would be more suitable in such circumstances. This white dimmer switch is equipped with intelligent dimming technology, a soft start, intelligent overload protection, and an adjustable minimum brightness setting. It also comes with a 10-year manufacturer’s warranty. Set as a trailing edge dimmer by default, it offers three programmable modes suitable for various LED applications. Although a trailing edge dimmer is considerably more expensive to buy, it has many desirable attributes over its leading edge counterpart and in certain situations may be more appropriate. Inductive Dimmer Switches

By adding additional Leviton Decora Smart Dimmer Companion switches, you can set up virtual 3-way, 4-way, or even 5-way control over your lights. The primary switch has to be wired to the lights like a traditional dimmer, but the companion switch can be placed anywhere and doesn’t need to be connected to the main switch by physical wires. The connection is achieved wirelessly through your Wi-Fi network, so you do need to have Wi-Fi to use this kit. It works with Alexa, Google Assistant, and Apple HomeKit, so you can also use it to operate and dim your lights through an app on your phone or voice commands. This high wattage Legrand switch is ideal for 3-way lighting setups. It’s rated to work with loads up to 700W, works with both incandescent and halogen bulbs, and it doesn’t need to be derated when installed in a multi-gang application. That means it’s capable of operating at full capacity regardless of whether it's installed in its own wall box or in a multi-gang box setup. It doesn’t work with either LED or CFL bulbs, so it isn’t the right choice if you don’t plan on using either incandescent or halogen lighting. On the other hand, mains voltage dimmable LED light bulbs and LED light fittings can be comfortably controlled using standard resistive dimmer switches. LED lamps are particularly appealing due to their low energy consumption and high energy efficiency. If you already have a smart home, or you’re in the process of setting one up, this smart dimmer switch from Kasa will make an excellent addition. Installation is simplified by detailed interactive instructions in the Kasa app, it works with several smart home ecosystems, and it connects directly to your wireless network so you don’t need to worry about buying and setting up a separate hub.

Leading edge dimmers are the most commonly used to dim incandescent and mains voltage halogen light bulbs and capsules. They are also used to dim most electronic low voltage transformers, including wire-wound or toroidal transformers and can also be used to dim constant current dimmable LED drivers under certain circumstances that will be explained later. Dimmer switches sometimes need a larger wall box than the switch you’re replacing, and you also need to consider the kind of bulbs you’re using and other factors. Toggle: These look like standard toggle light switches, but you can raise and lower the toggle to dim and brighten your lights instead of flipping on and off in two binary positions like you would with a traditional light switch. In other cases, the toggle itself acts as an on/off switch, and you adjust the illumination level with a very small slider that’s located right next to the toggle. These are best for applications where you won’t need to adjust the illumination level every day. The voltage rating of a dimmer switch tells you where you can use it. For example, residential electrical voltage in the United States is 110 - 120VAC. That means you can use any 110 or 120V dimmer switch in your home. Cost Savings: By curbing energy use and reducing the frequency of lamp replacement, dimmer switches can lead to substantial savings, making them a financially smart choice for your home.

Dimmer switches allow you to adjust the brightness of light bulbs. They adjust the amount of voltage that reach the bulbs. So, for example, the more voltage the bulb receives, the brighter it will be. What to Know Before You Get Started This is primarily a single pole switch, which means it’s easiest to use in a configuration where it doesn’t share control of the lights with any other switches. It is possible to use in 3-way installations with a mechanical switch, but that takes a little extra work. It requires different wiring from a traditional dimmer switch, so you’ll have to discard your preexisting knowledge and pay close attention to the instructions if you’re familiar with how 3-way wiring is supposed to work. The hidden benefit is that this switch is actually designed for multi-location dimming in up to 10 locations if you use Maestro Companion dimmer switches instead of traditional dimmer or mechanical switches. The SureSlide from Leviton is a slide dimmer first and a light switch second, which is why it’s our favorite slide dimmer switch. Dimming is provided by a large sliding bar that’s easy to operate. It also includes a toggle switch, so you can set your desired dimming level, turn the lights off, and then return directly to your chosen illumination setting the next time you turn the lights on. It works with a variety of bulb types, including compact fluorescent, LED, and incandescent, and you can also install it in both single-pole and 3-way configurations. This white dimmer switch features intelligent dimming technology, soft start, intelligent overload protection, and adjustable minimum brightness settings. It comes pre-set as a trailing edge dimmer with three programmable modes to cater to a range of LED requirements.

£140.00

Dimming fluorescent fittings is complex and can involve analogue or digital dimmers and a variety of different wiring schemes. These are expensive to install and are mainly used for commercial applications and are beyond the scope of this article. Tap: This type of dimmer uses a tap control to switch the lights on and off, and then another method to adjust the illumination. Due to the large variety and different applications of dimmer switches, we do not offer them for sale online. This ensures that you do not accidentally select the wrong dimmer for your application as this can cause expensive and irreversible damage to transformers or the dimmer itself.

Trailing edge dimmers are compatible with resistive or capacitive loads and are able reduce the load by shortening the A/C cycle at the trailing edge of the input waveform, hence the term ‘Trailing Edge’. The best of these are marketed as ‘intelligent dimmers’ and feature soft-start and overload protection to improve the life span of both the lamps and the dimmer. If you mistakenly connect too many lights or transformers to an an intelligent dimmer it will protect itself from failure by turning the lights down or off until the load is corrected. These dimmers are designed to endure the rush of a current that transformers typically produce during operation, providing a stable and reliable dimming solution. To accomplish this, inductive dimmers are already over-rated, meaning they have a higher VA rating than the wattage of the connected load. This over-rating allows them to cope with the inrush current without compromising the performance or lifespan of the lighting scheme. Adding a dimmer switch to a lighting setup, or replacing an old one with a newer model, can transform the look and feel of a room. “Dimmers are most useful in areas where you want to create ambiances, such as social areas, bedrooms, hallways, and bathrooms,” says Freddy Sampayo, chief technology officer of Schaller Tech. “It's also useful to think about spaces where you'd be annoyed to turn on the light when waking up groggily in the middle of the night.”They are commonly used to dim most electronic low voltage transformers (ELV) with capacitive loads on the primary circuit. Trailing edge dimmers can also be used to dim incandescent, halogen and LED lamps effectively. They should not be used on older type of magnetic core and coil wire-wound or toroidal transformers. With the phasing out of incandescent lamps, more and more fluorescent lamp manufacturers are making dimmable lamps available. They are at an advanced stage of development and although expensive at this time, it is anticipated that the price will reduce as they become more popular. Dimming LED Lamps Dimmers work by simply reducing the voltage supplied to the lamp, which in turn reduces the light output from the light bulb. There are many types of light bulbs and capsule lamps that can be dimmed but the requirements for each type can vary. If you select the wrong type of dimmer it may not work, could lead to reduced lamp life or even blow the dimmer or light fitting in extreme circumstances. Benefits Of Using Dimmer Switches In Your Home For example, the Kasa HS220, our best smart dimmer, works with Alexa and Google Home, but not with HomeKit. If your smart home is powered by Apple’s HomeKit, you’ll find that the Kasa HS220 just won’t work correctly. In that case, consider the very similar Kasa KS220 that works with HomeKit. The Kasa app works with both Android and iPhone, and it allows you to operate the switch remotely as long as you have internet access, so you technically don’t even need anything but this switch and your phone to get started. It does work with both Alexa and Google Home though, so you can operate the switch with voice commands if you have a compatible smart speaker. Smart home integration also lets you include the switch in daily routines, like turning the lights on or adjusting the illumination level at dusk.

Flexible Lighting Control: You have the convenience of adjusting the light intensity to match your mood or specific tasks, enhancing your home’s comfort and functionality. Dimmers aren’t all about setting the mood though, and Sampayo says installing them in your home can save you money, too. “Practically speaking, the human eye can't distinguish between 90 percent and 100 percent light brightness, but your energy bill can,” Sampayo advises. “Being conscious of energy consumption means you could set your lights to never exceed 90 percent, ensuring a 10 percent energy saving without compromising on brightness.”The switch employs an easy-to-use push for on/off and rotates to dim mechanism. It comes in various finishes, including polished chrome, satin chrome, antique brass, and bronze, among others. Engineered for a maximum LED load of 300W, this switch provides a smooth, silent trailing edge dimming experience, combined with intelligent lamp-type detection for adaptable load control. Intelligent Features: Best models feature soft-start and overload protection, which helps improve the lifespan of both lamps and the dimmer switch. These ‘intelligent dimmers’ can protect themselves from failure by turning down or off the lights when too many lights or transformers are mistakenly connected. Additionally, Sampayo points out that determining how many LED lights you can put on a single dimmer switch is a little complicated. “LEDs have a high current spike when switched on, and this varies among manufacturers. So, the rule is: Don't count the watts directly!” Instead, Sampayo recommends multiplying the total wattage of the LED bulbs by 7, adding a safety margin of 20 percent, and then selecting a switch that meets or exceeds those requirements. All dimmers are rated by wattage and leading edge dimmers are no exception. They are commonly available in 250w, 400w, 600w and 1000w modules. It is important to note that they also have a minimum load requirement of 25w, 40w, 100w and 150w respectively. Despite their advantages, it’s relatively uncommon to find inductive dimmer switches in regular domestic settings. Using Dimmer Switches With Fluorescent Fittings