Yakamoz 1/4 Inch Shank Rabbeting Router Bit with 6 Bearings Set for Multiple Depths 1/8", 1/4", 5/16", 3/8", 7/16", 1/2"

Product Information

If you don’t already own a router, now is the time to buy one. These versatile power tools are capable of a wide variety of tasks, and can often accomplish tasks in place of a tablesaw. They are ideal for cutting dadoes and rabbets, particularly when paired with the simple t-square jig detailed in this episode. What I actually did as a test was to make multiple passes across the table saw blade at a height I thought was right for the extra 6mm or so... this didn't leave something as neat as I wanted and I needed to clean up with a chisel. Next time (this weekend) I'll probably try the 2 cuts on the table saw method. One other very handy cut the straight cut bit can make is a plunge cut. This is when the bit is lowered down on to the surface and then starts to cut down in to it.

To be fair, I've only really used my router for putting nice edges on right-angled pieces of wood, plus my latest attempt at a rabbet. What I would like to do, though, is (realising that I must bite the bullet for building some jig / sled type thing) build myself a crosscut sled so I bought some 18mm plywood last night, and some wood for the runners and some for the fences... I do my work in the garden so if the weather holds out I'll give a crosscut sled for the Bosch GTS 10 J a go later today... However their main purpose is for creating decorative edges commonly used on tables, doors of various types, shelves and the similar. What is a dado? And what is a rabbet? Dadoes, grooves and rabbets are the workhorses of cabinet and bookcase construction. They're used in woodworking projects to make stronger joints. V-bits as with most other decorative cutting bits come in a range of different shapes and angles that can be used to form everything from a deep thin channel to a wide shallow one.

What is a Rabbet?

Flush trim bits are essentially straight bits with a pilot bearing that’s the same diameter as the flutes. The bearing at the tip guides the cutting arm perfectly around the edge of a surface, allowing you to trim overhanging material perfectly flush. You can use this for shelf edging, veneer trimming, or to smoothly join edges. They’re also great for duplicating curved patterns from a template. For trimming purposes, these bits can be used in a hand-held router, but a table-mounted router is best used when replicating patterns with a template. A rabbet is like a dado that’s missing a side. It’s essentially a notch cut into the edge of a board or piece of plywood. The rabbet cutting router bit is specifically designed for cutting rabbets, not the small cute furry ones found in most gardens but the rabbet joint or shoulder joint as it’s also known ( find out all bout rabbet or shoulder joints in our project here). Due to this if the profiles are cut the same then essentially a rounded off joint will fit into a cove-cut joint.

Unlike performing any of these tasks using other tools such as planes or saws, a router with the correct bit will give a 100% accurate and clean cut when used correctly. Due to the nature of a bearing and it’s very smooth rotation, this helps to avoid the router bit juddering or jumping around, keeping any cuts dead straight and accurate to the surface you are working on.The edge cutting bit is again commonly used in cabinet and furniture making for cutting and creating decorative edges, sometimes known as beads in cabinet and table tops, chair and table legs and many other different objects and surfaces. Is it because a trim router and a 1/4" bit would just find that too hard, even if I did multiple passes? Sets such as these include all the essential router bits you will need for pretty much any carpentry project and although they may not give the most accurate of cuts or stay sharp for long, they will allow you to practice and hone your skills to the point that you can then justify spending a little more on some decent bits. Router Bit Types For the router-table method to be both safe and successful, you must use the proper bit. Although a rabbeting bit seems logical, most are not designed for this application. On most rabbeting bits, the carbide cutter extends proud only on the top and has relief angles ground in the carbide to reduce burning. The bottom of the bit is often an afterthought, with the main body sometimes extending below the actual cutter. Some have a shear cut which, although beneficial when cutting from below, impedes the cut if used above since it directs chips to the base of the cut, which is exactly where you don’t want them to be. Also, many rabbeting bits do not have a long enough shank for the cutter to get to the proper height without seriously compromising how much of the bit is in the collet. Use slot-cutting bits

To determine the locations and dimensions of each of the dadoes and rabbets on the bookcase, use the free woodworking plan available for this project. Dadoes and Rabbets DefinedGlue joint bits assist joining two pieces of material by creating identical, adjoining tongues on the edge of both pieces. The notched cuts create plenty of surface area for gluing and form a tight-fitting joint that holds the pieces together while they’re being clamped. They’re available in two varieties: standard and mitered. The standard glue joint joins squared edges, while the mitered bit is made with a 45-degree angle to join two mitered edges. The name edging bit or edge cutting bit is a bit of an umbrella term as there are several different types depending on eth shape of edge you want to create. Typically edging bits are available to cut the following shapes: The configurable rabbet bit I bought (changeable bearings - think they're called "step washers"?) only goes to 1/2"... about 13mm. I have been looking for a rabbet router bit that will allow me to get to dead on the 19mm... but it seems to not exist? Synopsis: Decide what’s more important — the tongue or the shoulder — and you will know the best method to use for cutting a particular rabbet. Despite the simplicity of the joint, it’s not as cut and dried as it seems. Sometimes a tablesaw and dado blade is the best method; other times, you’ll want to turn to the router table. This project should be read in conjunction with our project on how to use a router found here. What are the Different Parts of a Router Bit?

There are several different parts that make up a router bit and understanding each of these and what they do is integral to they’re use. The main router bit parts to note are the shank, the body, the cutting edge and if it has one the bearing guide. Essentially the shank is the part of the bit that your router collet grips on to so that when the motor is running it allows the bit to rotate and do its work. Generally, router bit shanks are available in two different sizes; 1/4 inch and 1/2 inch.

Our best tips for getting your project done right.

You can control the depth of the rabbet by adjusting the height of the bit. But if you need a different tongue length, you need a different bit. You can cut rabbets of any tongue length with a grooving bit without a bearing, but you need to use it with a jig to keep it on a straight line. You don’t need a jig with a rabbeting bit. A lot of timber we buy over here is 19mm, isn't it? How best do we cut a rabbet that's 19mm wide by some depth? I'd have thought a router bit was the way to go. A rabbet joint is stronger than a butt joint for two reasons. The rabbet increases the amount of surface area available for glue. And when a piece of wood fits tightly into a rabbet, the vertical side of the groove prevents it from leaning in that direction and breaking the joint. Dadoes and grooves are flat-bottomed recesses that strengthen supporting shelves and connecting panels. A dado runs perpendicular to the grain of the wood while a groove runs parallel to the grain. What is a Rabbet? The straight cutting router bit is arguably the most commonly used type of router bit. As the name suggests it’s used for cutting straight cuts with a flat base e.g. the channels at the side of drawers that the drawer bottom sits in and certain timber joints such as a lapped joint.