Joined in 2023 
82 
63 About this deal
Damaged screw extractors are just one way of dealing with stripped screws, but they’re oftentimes the most efficient solution. And, when it comes to the specific model, the Alden Pro Grabit is one of the best options.
Each size is etched onto the tool for easy and fast identification. With 25 hex heads that range from 1/8 to 7/8-inches, this set also includes a handy, heavy-duty carrying case. Pros If you are not familiar with Grabit or a screw extractor system, the Grabit is a two step process. First a user will use one side of the bit to drill a shallow hole into the head of the screw or bolt. Then the user flips the bit over and drills the screw out. The bit actually sits in the first hole and grips the side of the screw to extract it. Yes it is that simple. Just remember you are extracting a screw, so make sure your drill is in reverse when you use the system. How many times have you ever tightened a screw, only to realize you went too far and stripped the screw? How many times have you tried to loosen a screw only to find that it was rusty and you stripped it? How many times, ok we will shut up, you get the point. No matter how good you are, there are times you will strip a screw, it is just the way the world is. While some people deal with broken pencils, we deal with stripped screws and bolts. Well let us introduce the Grabit Pro by Alden. The Grabit can save you a lot of time, but most importantly, it saves you a lot of frustration. You can easily deal with painted and rusted-over screws or bolts that are just broken if you have a screw extractor. Giving you just the right grip on a broken head, these extractors not only remove broken screws but can drill a hole that will allow you to pull them out. Just make sure that the extractor you choose has all these features. The Grabit – which you might have seen in an infomercial starting with “If you’ve ever stripped a screw or broken off the head of a bolt, you know how frustrating that can be. Well, not anymore!”– years ago is made in China while the Grabit Pro is made in the US.Unless you work a lot with screws of the same sizes – and even then – I recommend you get the ProGrabit 4-Piece kit to have all bases covered. It will also often be cheaper than if you bought different sized bits individually.
This four-piece kit allows you to easily remove damaged and broken bolts and screws in just two steps. The Alden Grabit Pro Screw Extractor Set features a burnishing tip on each of the 4 dual-ended bits to prep the bolt and screws for removal as well as a threaded tip that grips and extracts them when you use it with a 3/8-inch drill. This set allows you to remove many different types of screws up to four-inches long including square drive, hex, and Phillips as well as bolts up to 3/8-inch. Quality is one of the most important considerations when choosing a screw extractor. It’s important to look for an extractor that is made of steel. Keep in mind that not all screw extractors are made completely of carbon HSS steel, which is a special type of steel that is generally used in a drill bit allowing it to pierce through a heard object and make its way in. Since you may be dealing with damaged heads, you will want an extractor that has an excellent build quality that will be able to drill a hole into the damaged screw. Rust and Painted Screws Durability and quality are generally determined by the material that is used in the construction of an extraction tool. Typical materials that are strong enough to be used in extraction include carbon or hardened steel and most steel alloys thanks to the toughness of the steel. Also, look for other features like rust and corrosion resistance that are great for extending the life of the extractor. Gripping PowerFeaturing a universal design, the OEM Tools Bolt Extractor Set will work with any type of fasteners, and you can use the 3/8-inch square drive with air or hand ratchets as well as impact wrenches. You get maximum durability thanks to the chrome-molded steel construction while the professional-grade aluminum rail makes organization and storage easy. This five-piece set uses a specialized spiral design that offers a secure, universal grip. I tried to include all of the important things about the Alden Grabit Pro Extractor in the earlier sections. However, if you are looking for some additional information, I answer some of the most frequently asked questions about the product below. Can the Alden Pro Grabit Be Used with Any Drill? Starting with the pros, it’s a tool that is very simple to use and that is made from high-quality double-tempered steel. As such, unlike some of the other similar tools, it’s more durable and will last through multiple extractions. Then, place some thread-cutting oil on the bolt or screw for lubrication. Choose a drill bit size that is one size smaller than the bolt or screw before gently drilling between ⅛ and ¼-inch down into the shaft of the screw. Make sure you do not use too much pressure or go off-center. The hole that results should be large enough for the extractor tip to fit into.
It’s also convenient to use since both of the steps – burnishing the damaged screw head and extracting the screw – can be taken care of with a single bit. Using the tool doesn’t require any grinding or center punching. With each of the four bits, you get different widths that can handle a wide variety of bolt and screw sizes. This set is made with industrial-strength, high-quality steel that was created for use with a variable reversible drill. However, it is also effective when used with a ¼-inch hex screwdriver and can extract several types of fasteners including many tamper-resistant screws, Torx, Hex, Tri-Wing, slotted, and Phillips screws. In this thorough product review, we’ll cover some of the high-quality screw and bolt extractors available on the market today. Related Reading: How to remove the stripped screw [Tutorial] Features to Look for in the Best Screw Extractor Compatibility This easy-to-use set is super portable and comes with a tool kit box. This handy carrying case can fit in your bag and is easy to take wherever you go. Pros
Alden 1257P Grabit® Micro Broken Bolt Extractor Bit #1
Equipped with an aggressive left-hand design, you get extra gripping power while the easy-out style spiral flutes are capable of embedding themselves deep into the metal so the grip resistance can increase. Removing a wide variety of stubborn fasteners, the OEM Tools Bolt Extractor Set comes with fastener sizes including 5/8, 9/16, ½, 7/16, and 3/8-inch. This set helps to take a difficult task and make it simple. Plus, you won’t be wasting money and time or damaging parts by using the wrong type of tools. Since there isn’t a universal size, you want to make sure the screw size you are using is compatible with the application. Remember that there is a range of screw sizes that can be used in various applications. Some of these extractors were designed to work with any screw size while others were designed to only work with a specific screw size. So you need to know which type of screw you need to extract before you start.
Great Deal 
New Comment