LTP Stone Oil (1 Litre) - Oil-Based Impregnating Sealer

Product Information

Stone Oil has one of the best safety and environmental records in our industry – a goal we strive to maintain each day. We are strongly committed to protecting the environment as well as the health and safety of our employees everywhere we conduct business.

Important: Used cloths should be burnt as they may spontaneously combust. Allow good ventilation during application. Avoid working in direct sunlight; rapid oxidization may inhibit effectiveness. Excess sealer that is left to dry on the surface can be removed with white spirit. There are many different sharpening stones, but once you’re familiar with the most common types, you’ll be able to choose the right stone for your project. Benchstones are the most commonly used sharpening stones and are also known as oilstones or whetstones. As the term oilstone suggests, a thin layer of oil is typically used as a lubricant on this type of stone to enhance sharpening performance and to keep the sharpening surface from loading or glazing. Test the stone: To determine if a stone is oil or water based, you can place a few drops of water on the stone and observe how it reacts. If the water beads up and does not soak in, it is likely an oil stone. If the water is absorbed into the stone, it is likely a water stone.Arkansas stone, by contrast, is a natural sharpening stone made from a variety of quartz, as explained above. Ceramic Sharpening Stones vs Water Stones

Learn how to get the most out of your benchstones with our answers to the most frequently asked questions in our guide to benchstones. All Arkansas stones are not alike due to the porosity and density of the mined material. Soft Arkansas (extra fine) stones are the coarsest-grained and least dense of the natural stones. They are used primarily to sharpen and hone tool and knife edges to an even, polished surface, frequently after sharpening with man-made stones. Hard translucent Arkansas (ultra fine) stones are the finest-grained and densest natural stone available and are used to produce the keenest, most precise finish possible, as well as polished, razor-like edges.

Embalming Fluids

For the best results, choose a size that allows you to sweep the entire length of the blade across the stone in every sharpening motion. Short lifespan: The oil used on oil stones can eventually become rancid, affecting the sharpening performance and shortening the lifespan of the stone. Water stones are high maintenance and expensive, but offer a wider range of grits and a longer lifespan. The choice is yours, my sharpening-savvy friend! Just remember, no matter which stone you choose, proper care and maintenance are key to getting the most out of your investment. So, oil up your oil stone or soak your water stone and let's get sharpening! FAQ Occasional application of oil to keep the stone lubricated and prevent it from becoming clogged with metal shavings. Clean periodically of any metal shavings and apply a light coat of oil to keep lubricated. Material: Oil stones are made from aluminum oxide or silicon carbide and are typically coated with oil or honing oil to reduce friction and prevent the stone from clogging with metal shavings. W hetstones, on the other hand, are made from a combination of abrasive materials such as aluminum oxide, silicon carbide, or Novaculite and are used with water as a lubricant.