Kreg KJDECKSYS20 Deck Jig

Product Information

The STANLEY Tylon tapes comply with European class II standards. This means the maximum permissible tolerance over 3 metres is less than a millimetre. The Tiger Claw TC-G Hidden Fastener system by FastenMaster is ACQ-compliant and compatible with grooved boards including Trex, Fiberon, Wolf, Veranda, Brazilian Redwood, Ipe, Ironwood, Teak, Cambara, and more. However, if you specifically want your gloves to be a closer fit for work that requires fine movements, select the smaller of the two sizes. To select the correct glove size, simply measure across your palm at the point indicated in the last picture on this listing. Then compare your measurement with the chart below to ensure you select the correct glove size for your hand.

Kreg Jigs, Hand Tools, Accessories Available Online South Kreg Jigs, Hand Tools, Accessories Available Online South

While nails are good spacer options, they can also be difficult to work with. Nails can easily slip out of your fingers or between the boards and onto the earth below. A 1/8” gap can easily be accomplished through the use of an 8d nail. Lay the boards in place, using several 8d nails as spacers. While pushing the board flush against the spacers, secure the board into place with your choice of fastener. So when it comes to versatility, Kreg is the winner. But if you want to keep your hands free while working, Camo is a go. I feel your pain fobos, I have worked with various hidden fixings over the years, all rubbish, the only way I would ever recommend and guarantee is to screw and plug, Don’t despair! There is a solution here. You’re not the first one to make this mistake and you certainly won’t be the last. The folks at Lounsbury Products LLC know this, and they’ve designed The Saw Guide to help you.

Also, keep in mind that this is an entire hidden fastener system, so the price point will be higher.

Deck Board Spacing: Last Guide You’ll Ever Need Proper Deck Board Spacing: Last Guide You’ll Ever Need

These screws feature a highly weather-resistant Protec-Kote finish which protects them for use in outdoor applications. With a razor-sharp cut point and ground, serrated lower thread, these screws will not split or splinter the wood even when used at the board's edge. If you can acclimate your wood, cover it and make sure it is not sitting directly on the ground, so it doesn’t soak up rain or groundwater. Camo is pretty much professional level. It is made for professional people who carry more tools but need something efficient. So if you’re a beginner, don’t reach for the Camo tool. And the best part is, this tool won’t cost you much more than lunch at your favorite fast food joint.These boards come finished with two different profiles, giving you the ultimate flexibility and allowing you to get creative with your outdoor space. This makes the wood less susceptible to cupping, warping, expanding and contracting that wet wood typically undergoes. This means KDAT can be installed with a 1/8-inch gap. It should be noted that KDAT does need to be immediately stained and sealed after installation to protect it from the sun.

7 Best Hidden Deck Fasteners | Which Is Actually The Best 7 Best Hidden Deck Fasteners | Which Is Actually The Best

Maybe the spacing isn’t quite right, or maybe you don’t want to deal with the creaking so you want a replacement.

You’ll get a bunch of spacers for different gaps. You can also buy other spacers if they don’t work out. The Predator Jet PU Work Gloves are lined with a 13 gauge seamless Polyester liner and have a Polyurethane palm coating. Includes universal holder with strong permanent magnet for the take-up of bits with 1/4" hexagon head drive. Please note: Should you need any additional screws, please use the Kreg 2" screws as these are made specifically for this system. These can be found at the bottom of this product in related items.