If you are considering hiring a professional, you can relax knowing your job will be done efficiently and to a high standard. In general, a plumber will charge the below prices to install your washing machine: A great place to start is by reading the manual that comes with your washing machine. It will guide you towards the best way to install the washer. It is important to note that when using a sink waste or standpipe to connect your machine, you should not connect directly into a standpipe unless is it bigger than the drainage hose.

I have watched some YouTube videos on how these fittings are connected together with rubber washers so I'm quite confident I can do the job myself but would really appreciate some advice on the above.Connect the water supply hose (ensure the hose is long enough and never over stretch it). It is worth following the manufacturer’s guidelines to ensure you are connecting your hose in the correct manner. Ensure the lip of the standpipe is 30 inches from the ground. To finish, it is a good idea to either install a non-return valve or hook your drain hose up and under your worktop. Hiring a professional Failure to comply with the regulation could see you face prosecution. So, to be a law-abiding citizen, it’s wise to install this feature. 4.Avoid Expensive Repairs

Always be confident you know what you are doing and if you become lost at any point do not hesitate to call in a professional. In fact, finding an approved tradesperson in your area couldn’t be easier, just use our free search feature. Carefully consider the best location for your new washing machine, it should be somewhere convenient with easy access and close to a water source. They are pretty inexpensive and come in a variety of finishes. These devices work by separating the clean water hose from the wastewater hose. The great thing about owning a caravan is that you can completely plan the layout and what you wish to install. Using a portable washing machine is a brilliant choice in a caravan where space is at a premium.And would I need to replace the P-Bend that comes with the kit or can I just replace the current down pipe with the new double spigot down pipe? If I do need to or it's preferable to replace the P-Bend as well, will the replacement P-Bend fit? I have no experience with plumping fittings so am unsure whether P-Bends are standard dimensions. Also the fact that I've not seen any P-Bend kits that look similar to my current P-Bend. Unsure how to plumb a washing machine under the sink? It is actually very similar to installing a washing machine normally.

Owning a washing machine and dishwasher will save you a lot of time and energy as opposed to washing clothes and dishes by hand. Wondering how to plumb in a washing machine and dishwasher together? Our top tips below will help you with installing these handy little machines: If the hose from your machines will not reach the current pipes, you will need to switch off your mains water. Now it is possible to install T-fittings and use branch pipes to connect to the machines. Attach the hoses from the machines to a mini stop valve. This will allow the individual machines to be isolated even without turning off your water supply. You’ve found the right part. Replace everything below the elbow in the right hand picture and everything below the shelf. Offer it up with all the joints loose so you can adjust everything.

So, whether you choose to drink or wash with our water supply, you don’t have to fear unpleasant smells or colors. 3.Legal Compliance Next, connect the washing machine’s waste hose to a standpipe that has a P-trap. Then attach the dishwasher’s waste hose to the same standpipe. You will need to locate the hose connections under your sink and should switch off your water supply before beginning. Connect the washing machine as described in our ‘how to plumb in a washing machine’ section, and it is worth keeping the drain cap under your sink for any future washing machine installations. How to plumb in a washing machine in a caravan