Paslode Impulse / Spit Pulsa Cleaner

Product Information

When it comes to the motor, your attention should be on the impeller blade. Use, brush, aerosol, and a piece of cloth to clean the blade and to wipe out any leaked lubricant. #2. Clean and lubricate the feed system Is your nailer not firing properly? See our handy Paslode Troubleshooting Guide to help you diagnose the problem. Here are some great options if you’re looking for an equally powerful but cheaper Paslode degreaser cleaner alternative.. Paslode degreaser cleaner alternative – 2 recommended options that work as well

Hitachi Cleaning Kit For Gas Nail Guns NR90 / NT65 714800

In a nutshell, using it as a Paslode nail gun oil substitute will be calling for trouble and more expenditure down the road unless you can, of course, prevent it from getting on the sensitive parts somehow. Do you want to learn how to clean your Paslode nail gun? It’s easy and only takes minutes! Read on to find out how. Paslode Maintenance While holding the air hose connector in an upright position, add few drops of the recommended oil through the air inlet port and re-connect your machine to the air hose. Pull the trigger several times to help spread the oil throughout the machine. Step 5: once you’ve finished cleaning the chamber, use the supplied lubricant and apply a small amount around the chamber and the seals. Don’t think of carb degreaser cleaner though- it has some terrible ingredients and hardens or dissolves plastic, rubber, and the like.If available, it’s advisable to hit the nail gun with a bit of air to mop all the spots you can’t wipe.

Paslode | Toolfix Hardware | Ireland Paslode | Toolfix Hardware | Ireland

Be sure to consult with the user manual for more information on cleaning filters. Most can be cleaned with a simple soap and water solution.Pneumatic nail guns have unique maintenance tasks that need to be performed, but there are also some general maintenance tasks that apply to all nail guns – corded, cordless and pneumatic. Screw and Bolt Inspection Paslode recommend that you use their official cleaner as, again, it’s specially formulated for their nailers. Other cleaners may chemically damage your nail gun’s electrical, plastic and rubber parts. They may also leave a residue which can cause damage to both you and your nailer. Use a clean, lint-free cloth. Proper lubrication will keep the tool running smoothly. If the nail gun will be used all day long, oil may need to be reapplied throughout the day. Spray the cylinder head assembly liberally and get rid of the gunk with lint-free cloth/ compressed air.