Teltonika 4G-RUT240 Compact Industrial 4G LTE Router

Product Information

PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt Prolonged use in such space may cause excessive heat and raise ambient temperature, which will lead to the automatic shutdown of your device or the disconnection of the mobile network connection for your safety. To use your device again after such a shutdown, cool it in a well-ventilated place before turning it on. This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with the relevant FCC RF radiation exposure limit set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20 cm from all persons. Power on and connect with an Ethernet cable to the LAN port and your router should have reset to factory default settings.

Este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. The Sign the certificate slider control whether the certificate will be signed automatically or manually after the generation is complete.Generating each type of file (excluding 'Simple') requires setting some parameters. This section provides an overview for parameters used in TLS certificate generation.

Hawnhekk, TELTONIKA NETWORKS tiddikjara li dan l-RUT240 huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħra tad Direttiva 2014/53/EU SSHFS is a tool, which allows you to mount a remote filesystem (in remote SSH server) to your RUT240 device using SSH. The DHCP force function ensures that the device will always start it’s DHCP server, even if there is another DHCP server already running in the its network. By default the device’s DHCP server will not start when it is connected to a network segment that already has a working DHCP server. This device must accept any interference received, including interference that may cause undesired operation. Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI APEnsure that the voltage and the rated current of the power source match the device’s requirements. Do not connect the device to an inappropriate power source. Leis seo, dearbhaíonn TELTONIKA NETWORKS go gcomhlíonann an RUT240 seo bunriachtanais agus forálacha ábhartha eile Threoir 2014/53/EU Fixed an issue where signal query would return invalid value instead of error in case of no signal in MQTT Publisher service

The SSIDs section is used to configure your wireless access points (AP) and wireless clients (STA). Mode determines what options and configurations are shown. In Basic mode only the essential configurations are shown. In Advanced mode there is greater freedom to configure and access more options.

The Root CA section is used to add a root CA certificate file to the device. There is a default file already preloaded on the device which will be overwritten by any uploaded file. The certificates must be in .pem format, maximum file size is 300 KB. These certificates are only needed if you want to use HTTPS for your services and the default file should be sufficient in most cases. By default the remote file system will be mounted on /sshmount, directory will be automatically created if does not exist yet. A DHCP lease will expire after the amount of time specified in this field and the device that was using the lease will have to request a new one. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes (e.g., if lease time is 12 hours, then every 6 hours the device will ask the DHCP server to renew its lease).