Carburetor for Stihl FS46 FS55 FS75 FS80 FS85 HT70 HT75 FC55 FC75 FC85 Trimmer Replaces ZAMA Style

Product Information

But, since the design of this module, as well as its operating principle, is largely similar between different models, a generalized description of the processes occurring in the carburetor can be made.

Stihl FS45, FS55 Brushcutters - OEM Carburettor C1Q-S265 for Stihl FS45, FS55 Brushcutters - OEM

cc engine will come to life, with the inbuilt electronic ignition module ensuring easier starting and continuous firing of the motor. Strainer How to adjust the chainsaw How to properly adjust the carburetor on the husqvarna chainsaw. The lightweight frame and engine of grass trimmer will reduce the stress on your lower back whilst operating. Damage to the trimmer carburetor occurs due to the use of poor quality gasoline, a damaged air filter and the accumulation of dirt in the chamber of this unit.The general adjustment of the highest revolutions, engine power, temperature and gas mileage depends on the left screw (H). The position of the throttle (9) determines the amount of air entering the carburetor chamber, as well as engine power and the number of revolutions. As a result of wear of the dampers, engine performance decreases, malfunctions appear in its operation, piston rings, piston and cylinder cover wear out. In the photo below you can see what a clean filter looks like and dirty (the parts are separated by a dash). Also exist screwless carburetors, responsible for the enrichment of the combustible mixture at low speeds.

Genuine Stihl FS55 2-MIX / S - Carburetor C1Q-S282 2-MIX

Stihl has designed the FS 55R brushcutter with the traditional grip combination; one hand at the motor, the other at the loop hold further down. This information will allow the user to understand the principles of operation of the device, eliminate the problems that have arisen and operate it correctly. It’s easy to operate with one hand, with the simple trigger switch on the handle, your hand will never have to leave the strimmer’s controls. This problem may occur if the adjusting lever is not installed correctly, or bend it before installation.It is curious that, based on the beliefs of the creator of the video, the setting (its correctness) is determined by the color of the candle, and not just by the speed and stability of the motor.